Ok i just got my D250 a few months ago and have already had to put a new motor in it about 3 months ago. Now im having another proble the truck wont turn over. I h ave power to everthing but it wont start. I replace the ignition to see if thats what the problem is and it still wont crank over. the wait light doesnt come on or anything. I went through my hanes manuel to see if i put in the ignition wrong and i didnt. so i am not sure on what else it could be. i have tried locating a wiring digram for the whole truck and can not locate it. i dont want to take it back to the shop but i feel like im at a lost on what to do and will h ave no choice. Advice would be greatly appericated on what you think i can do to fix it. Even if it comes dow to hot wiring the truck i will. Just want to use that as a last resort.

 

Check your fuseable links the orange one closest to the engine runs the ignition.

 

ok update on the truck the guages and everything passed the ignition seems like its not getting power from the ignition but the ignition is brand new

 

Did u check the fuseable link?