1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

what did you do to your truck lately?

Thread Tools
 
Search this Thread
 
Old Jun 25, 2011 | 08:43 PM
  #31  
Joe1750's Avatar
Newbie
Joined: Jun 2011
Posts: 1
Likes: 0
From: Perkins OK
Default

Over the past three days I've done the rear main seal, new clutch, installed the getrag I built last week, and then built 4" exhaust.
 
Reply
Old Jun 25, 2011 | 09:20 PM
  #32  
terragota5.9cummins's Avatar
Diesel Fan
Joined: Apr 2011
Posts: 60
Likes: 1
From: Mercer Pennsylvania
Default

tear down to frame strip and paint with brush 2 coats of chassis saver then top coat with black enamel (sprayed) new tranny bushings .time to start putting it back together . pick up 2 aftermarket fenders at local parts-a-rama in butler pa .now assembly starts. could almost call it a frame up restoration ,but did not pull the cummins or remove the axles.still need to replace the sagging front leaf springs cant decide on stock or lift kit as the rear springs were only a few months old(stock) sitting on top of 6" blocks .would post pictures but for some reason i cant get them to load
 
Reply
Old Jun 27, 2011 | 04:19 PM
  #33  
Glantz496's Avatar
Diesel Fan
Joined: Jun 2011
Posts: 42
Likes: 1
From: Bradford,PA
Default

Finally got my 4" exhaust installed Also got some heavy duty spray adhesive for the headliner again....hopefully that works too
 
Reply
Old Jun 27, 2011 | 05:43 PM
  #34  
PSD-BLACK-CLOUD's Avatar
Diesel Enthusiast
Joined: Oct 2010
Posts: 430
Likes: 21
From: College Station
Default

Put a dent in it/

Going to try and figure out wtf is wrong the the ac this weekend. I think the cluth is going out.
 
Reply
Old Jul 17, 2011 | 06:38 PM
  #35  
Glantz496's Avatar
Diesel Fan
Joined: Jun 2011
Posts: 42
Likes: 1
From: Bradford,PA
Default

Well....headliner came loose again....... But on the good side finally got it down to where i live and it rode awesome till i tried to install my 3200 rpm spring and broke my fuel supply line and to only find out it was already installed....bad luck on top of more bad luck
 
Reply
Old Jul 17, 2011 | 07:53 PM
  #36  
baddodges's Avatar
Diesel Enthusiast
iTrader: (1)
Joined: Nov 2010
Posts: 247
Likes: 16
From: steamboatsprings,co.
Default

Installed airbags,a ranchhand bumper and smarty jr.with dpf and egr deletes.and soon gauges.
 
Reply
Old Jul 17, 2011 | 08:00 PM
  #37  
sweetv8s10's Avatar
Diesel Enthusiast
Joined: Nov 2009
Posts: 498
Likes: 20
From: El Dorado Springs MO
Default

Got my 4in turbo back DIAMOND EYE exhaust put on and made me a home made cold air intake.
 

Last edited by sweetv8s10; Jul 17, 2011 at 08:18 PM.
Reply
Old Jul 17, 2011 | 10:04 PM
  #38  
crazy clem's Avatar
Diesel Fan
Joined: Jul 2010
Posts: 96
Likes: 6
From: langley B C
Default

Ripped all the padding out from under carpet, rust proofed floor , added new foam to worn out seat,added 2 more 6x9 speakers to cover up loss of sound proofing under carpet
 
Reply
Old Jul 18, 2011 | 01:13 AM
  #39  
1989w250's Avatar
Diesel Enthusiast
Joined: Mar 2011
Posts: 171
Likes: 4
From: Washington
Default

New shocks, New oil, Put a trailer hitch on it, Performance air filter, Custom stacks(The kit is $400 but i did it myself for $150), Three gauge pod and Trans temp, Boost, And EGT gauges, Painted the valve covers and the ram off the turbo, Got a tailgate and a 92 grill and painted them to mach the truck. I did well over $1000 of upgrades and only spent $500.
 

Last edited by 1989w250; Jul 18, 2011 at 01:24 AM. Reason: OOOPS
Reply
Old Jul 18, 2011 | 06:19 PM
  #40  
CaseyF's Avatar
Diesel Fan
Joined: Dec 2010
Posts: 38
Likes: 0
Default

sweetv8s10, Your intake looks very similar to mine, without the heatshield.
Name:  IMAGE0006.jpg
Views: 145
Size:  84.0 KB
 
Reply



All times are GMT -5. The time now is 06:42 AM.