sound dampening?
#1
#3
get on summit racing, they sell this stuff called "BOOM" its a spray on sound deadening material, its convenient and allows application in tight and places that get wet. its kind of pricey but compared to dynamat it cant be any worse. its not very robust so using it as a floor liner wouldnt be recommended. more than one layer for best results.
#4
Also check out Lizard Skin its a spray on they make a couple different types depending on what your trying to achieve.
http://www.lizardskin.com/pages/sound_control.php
http://www.lizardskin.com/pages/sound_control.php
Last edited by UCTJ; 04-11-2011 at 07:45 PM.
#5
For a low cost sound deadener, buy some cheap old paint and mix it up with sand and apply a very thick coat to your floor boards & firewall.
---AutoMerged DoublePost---
Here's another alternative that's low cost and bit more professional:
Read the following link. Use what you learn and buy the products on your own from lower cost vendors.
Sound Deadener Showdown - Your Source for Sound Deadening Products and Information
The cheapest place I have found for the MLV is here:
Soundproofing Mass Loaded Vinyl Barrier, Super Soundproofing Co
---AutoMerged DoublePost---
Here's another alternative that's low cost and bit more professional:
Read the following link. Use what you learn and buy the products on your own from lower cost vendors.
Sound Deadener Showdown - Your Source for Sound Deadening Products and Information
The cheapest place I have found for the MLV is here:
Soundproofing Mass Loaded Vinyl Barrier, Super Soundproofing Co
Last edited by Edahall; 04-11-2011 at 10:35 PM. Reason: Automerged Doublepost
#6
Also check out Lizard Skin its a spray on they make a couple different types depending on what your trying to achieve.
Lizardskin Ceramic Insulation and Sound Control Spray-on Formula
Lizardskin Ceramic Insulation and Sound Control Spray-on Formula
nothing better than that
Thread
Thread Starter
Forum
Replies
Last Post
Timglow546
Ford Powerstroke 03-07 6.0L
8
06-03-2015 10:13 PM
JoeRamsey26
24 Valve 2nd Gen Dodge Cummins 98.5-02
5
05-29-2015 06:40 PM
mpmcbride42
Chevy/GMC 6.2L and 6.5L
7
04-07-2015 08:28 PM