Looking 4 Parts? - Check in Here
Here Is My LATEST BRAINSTORM .....
I have a hek of a time findin parts , As do many many others with 20+ year old trucks. Maybe tucked away in our bookmarks & favorites . Well if I show you mine & you show me yours & so on etc etc . Maybe get them grouped into a parts section . I dont know , Its more of a brain fart than a storm but it may help . What do ya think ????? |
that not a bad idea.:tu:
here is a couple sites: Raybuck Autobody Parts LLC - Rust Repair Body Parts - Chevy Ford Dodge PartsTrain.com - Hard to Find Auto Parts and Truck Parts :rocking: |
Aw crap parts train was one of mine . Here's a good one & it has pictures.:jump: https://www.moparliquidators.com/dod...500-parts.html
|
Good thread guys. I'm gonna sticky it so its always at the top.
|
here is another one i found.
it is not as good as the other ones but it works Truck Parts Inventory - Used Heavy Duty Truck Parts Inventory |
I keep alot of stuff on hand as well :jump:
|
|
Some of my favorites . . . .
General:
Cummins QuickServe Summit Racing JEGS Performance Auto Parts Engine: Haisley Machine PDR Diesel Performance Scheid Diesel Service Co. Diesel Power Parts Glacier Diesel Power Intake & Exhaust: AirFlow Donaldson StylinMotors Transmission & Drivetrain: Sun Coast Converters & Diesel Transmissions Performance Automotive Transmission Center WITtrans Transtar Full Pull Motorsports Useful Tools: Wallace Racing - Automotive Calculators |
yea i like the idea by the way im new to this site but i have a 91 cummins dually
|
Car-Part.com--Used Auto Parts Market
It's a database of inventory shared between auto wreckers all over north america |
Awesome! You guys are the best :tu::yeah::rocking:
|
|
1 Attachment(s)
does anybody know where to get the trim that runs sown the side of the truck? i need it for the front passenger fender
|
I can't seem to find patch panels for me 93 w250 for the rear wheel arch l. It is a small spot on both sides that stays hidden under the trim. It is about 2 inches tall and about 6 long rotted all the way through:dang:
|
look here - 1972-1993 Dodge Fullsize Pickup/Ramcharger :tu:
|
does anyone know if its even possible to get a entire cab?? i wanna swap my reg cab to a standard cab
also if there is one close to you, this place is good for some exterior pieces http://www.certifit.com/ |
|
hay everyone im new here iv been looking for a upper control arm for the drivers side for a 92 250 and i cant find one any help would be great please help and thanks
|
Anyone know where to find a dual exhaust straight pipe? I want one for a 1990 single cab. No mufflers!
|
my name
Originally Posted by 92cummings12v
(Post 731466)
hay everyone im new here iv been looking for a upper control arm for the drivers side for a 92 250 and i cant find one any help would be great please help and thanks
|
have you located the upper control arm . i have a 1992 dodge 3/4 ton 2wd
|
control arm
yes i have found one i finelly found one online on an awsome web site got it brand new along with a bunch of other parts at the site partswebsite.com thay were really good people to deal with thay called me to make sure of my vin to thay were sure it would fit b4 sending it and thay have alot of hard to find stuff deff a favorit list add
|
good parts cheap!
another great not so well known source is mill's supply, theyve got a whole mess of first gen sheet metal and it's not too expensive and it doesnt feel like tinfoil either, just did rust repair on my brother's 2002 f250 and the panels made lmc's look like paper! :jump:
|
fan shroud
anyone know where i can find a decent fan shroud for a intercooled truck? i found a perfect one in tennessee, from car-part.com, and ups delivered it in 6 perfect pieces, theres a beautiful one local to this state, rancho cordova, wants 375.00 for it, just a bit high for my budget, hoping someone has one somewhere.
|
HElP
I have a 93 dodge w250 cummins diesle with a 4inch lift kit and stage one injector what would i have to do to make it 500 horespower and and not sure if old owner put all the right things on the truck for the lift:humm:
|
hey guys im looking for the plastic factory moulding for the inside of my truck the pieces that hold the headliner in anyone have any ideas?:argh::argh::argh::argh:
|
Blacksmokin.com built to order ip's, injectors, and hard lines.
|
i need the stock pillar for 99 dodge. my grampa wants to take his guages out and he wants the stock pillar back?
can u help me? :argh: ---AutoMerged DoublePost--- dodge the father ram the daughter!! |
1 Attachment(s)
--------------------------------------------------------------------------------
i need the round gear shifter that your stick attatches to that goes into the top part of the aluminum shifter anybody know where i can get one? see attached picture cause i probably messed it up explaining it Attachment 21680 |
Can anybody tell me where one can buy a Auto. Trans. Throttle Valve Cable for the 5.9 cummins and 727 trans. Been looking for 2 months and can only find a few after-market ones for gas pots. Gettin' frustrating..... :scare2:
|
Originally Posted by young gun
(Post 719347)
does anyone know if its even possible to get a entire cab?? i wanna swap my reg cab to a standard cab
also if there is one close to you, this place is good for some exterior pieces Certifit Online |
jwirth got email about the 5.9 and trans but could not get e-mail back to you as i am new to this computer thing -just slower at picking this up with no help
|
I am looking for a ve pump for a 93 cummins diesel 5.9
|
I have a tailgate if any one is looking for one 92-93 150, 250 style PM me for pics I can email or text them to you
|
Looking for a driver side power mirror for a 92. If you have one, just need to see a couple photos and what you want for it. Thanks
|
well i need a full parts truck for mine my bodys in awful shape after a 5th wheel trailer did a good job smashing the top of my bed and waving my back floor up bad so a new bed is in order front fenders would be nice after pushing a 40 ft bus up hil for awhile kinking the hell out of them interior trim would be nice to in dark maroon and seatbelt for passenger side cab light for the back of cab idk what else off hand but if anyone has a 1/2ton 3/4 ton 2wd long bed for 200 give me a call i need parts
|
i have a 91.5 inter-cooled 12v and im looking for that tubing that goes from the intercooler to the top of the ve pump, i think its the idle control censer but im not sure.
thanks |
Does any company make Graphite Impregnated Polyurethane Control Arm Bushings for 1993 D350 2WD?
|
hi im new to this site but i got ap project i got a 89 w 150 with 3/4 springs in axles are on the way a 5.9 12 valve that i currently just rebilt and its sitting in the truck now thw only questions is transmission and wondering what would be a good auto and manuel to go with any ideas?
|
Ok why doesn't anybody like Painless Wire Harness or LMC truck not make parts for these 1st gen trucks? They make them for everything else but not the 1st gens. They go from 94 and up but nothing 93 and older???
|
All times are GMT -5. The time now is 04:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands