Since this seems to have turned into a bit of a wtb thread.....
I need a good HC1 turbo, all stock is fine but must be in really good shape, prefer rebuilt or some such, hx35 would be considered but truck is all stock sans a marine head gasket and somewhat better head bolts....no fuel mods. Also need a radiator, all for 92' 5.9 IC 2wd 250 automatic. Thanks :) |
OK here it goes
new body fender dalat auto in reno nv Carro pacific in Sacramento Ca used parts!!!!!!!! vicking in ca pickNsave in nv 775-246-0711 D&L auto (ford) 775-246-3444 well there is a few and most of them have the hotline to locate:argh: |
I have an almost perfect 1989-93 dodge P/U bed, It is a long box and i did all the prep work to paint it Im asking $400 OBO I cant get pics onto the computer but i can send them via txt 425 505 3441
I live in washington and have no way to ship it |
I am in need of a ve pump top, or entire pump, i really only need the manual fuel shut off assembley on the side, but would buy the pump top or pump to get it, please send me a pm of what you got and how much, thanks!
|
do you still have this truck if so you parting out i need grille assembly with lights call or text me 5173045355
|
IN NEED OF A GRILLE ASSEMBLY AND LIGHTS!!!!!!!!!!!!!!!!!
|
Fuel pin sleeve > needed
My fuel pin sleeve has a crack through it, trying to find one, can anyone help me out? thanks...
|
Hubcaps?
Looking for the stock dog dish hubcaps with the beauty rings for 16" wheels. Anyone know of anything?
|
Thanks guys!!!
|
Looking for the interior plastic molding for my 92.5, mines missing a piece right above the drivers side window and most of the the piece that runs along the top of the rear window and bottom. Anyone that might have some spares laying around or know where i may acquire some, id greatly appreciate it.
|
Originally Posted by NKY 1stGener
(Post 916200)
Looking for the interior plastic molding for my 92.5, mines missing a piece right above the drivers side window and most of the the piece that runs along the top of the rear window and bottom. Anyone that might have some spares laying around or know where i may acquire some, id greatly appreciate it.
Newman, good luck finding anything forsale on here ur better off to just post to the thread thats what i do! |
looking for a fan shroud in good condition new or used
---AutoMerged DoublePost---
Originally Posted by frankbooth
(Post 904238)
Looking for the stock dog dish hubcaps with the beauty rings for 16" wheels. Anyone know of anything?
|
I have had some luck with parts geek
|
This thread sure turned into a train wreck. :td:
|
Sorry
Posted that under wrong thread.. Still trying to get the hang of it... Yeah parts geek would not have those hub caps lol..
|
HELP!!!! HEAD GASKETS BLOWN!! how bad of job is it?
|
Your in a parts thread not repair, suggest you move it toi a more appropiate section, better chance of a response
|
does anyone know where I can get a dipstick tube for a 90 12v. I was told they are a 3 peice set up, the top peice which holds the dipstick, the middle section, then the metal section that goes into the block, and I need the middle section. can't find one anywhere and dodge wants $60.00 for the stupid peice of plastic.
|
Grille peice
So I need the grille frame. The piece that goes around the grille insert and headlight doors. I can find the insert and doors everywhere but no grille frame. Anybody seen any for sale recently?
|
Parts train or rock auto i believe have them.
|
Nope, neither one have it. Atleast not for the 89. I remember looking when I bought the truck 3 years ago and found several online but they were spendy. Now they are not to be found anywhere.
|
Hi Im new to here and looking for a part# 4428904 its a shifter boot that goes underneath the outside one on a 1993 Manual trans truck. ( I just finished the manual conversion) can anybody help?
Thanks Knute |
Need a headliner for 1992 W250 Club Cab
Gents...can't seem to find a headliner board and mounting hardware for this part. Any sources? Feel free to respond here, or write me at chipharper@me.com[/email]. Need this for my project truck!:tu:
|
1992 5.9 cummins any help would be nice
It is leaking fuel what seems to be out the bottom of the injector pump when it is turned off but quits when it is started and have to bleed injectors for it to start back up
|
hey guys, looking for a clutch pedal assembly from a first gen for my nv4500 swap, about the only part i am missing now... really hope someone here can help me out and i hope i am posting in the right spot, not sure if i am allowed to start a thread asking for parts when there is a sticky for parts?
|
Maybe it's just me, but this VERY hopeful thread with tons of potential has been completely hijacked. Half this crap needs to be deleted from this thread. IMO
Bed parts MAR-K Catalog - Select Your Truck P-Pump conversion Shopping list for P Pump conversion - Page 2 - Dodge Diesel - Diesel Truck Resource Forums |
Hey guys I'm new here but I have a 1993 dodge w250 diesel and am looking for a reg cab with as little rust as possible. unfortunately I love in nj and finding anything with out rust is impossible.
|
I have a bunch of first gen stuff as I am in the process of building several crewcab's .best way to see if I have what you need is send me a E mail
simplysmn@aol.com put dodge part's in subject line Please other wise I won't see it and it will get deleted .have 3 shorties and 2 longbed's we are building up Stay tuned |
looking for a dana 70 with 3.07 gears srw out of a 89-93 d250 cummins. need it asap
|
ECU
Hey guys. I'm looking for an ECU for my 5.9L D250 turbo Cummins. My alternator isn't charging and my overdrive doesn't work along with odometer not working. Consensus shows that it's possibly an ECU. Anyone have a used one in good shape or know where I can get a decent one? Junkyard is out of the question they are all gone. Thanks! Please message me asap!
-Mike |
new to this
Well folks this is all new to me, I have never posted anything before but I am in a binde, My son and I are having a very hard time finding the engine mounting brackets for a 1993 5.9 cummins. It appears to be a two (2) part system that is mounted to the engine block, one (1) plate bolted to the block and then a bracket that bolts to the plate and the motor mount. Any information would be great
|
Looking for oil dipstick tube would anyone know where I may find on
|
rockauto.com has alot of re manufactured parts, oem replacement parts and they are decently priced.
|
hey all, im looking for a stock intercooled air horn, for my non intercooled motor, i want to do a powerstroke cooler conversion and i dont really what to buy the pusher air horns as im not going to be making enough hp to utilize a 3 inch air horn
|
WTB 92-93 Wiring Harness
Looking to buy a wiring harness for: under hood, head lights, turn signals, steering column and under dash with fuse panel? 1992 is perfect, but I'll work with a complete 1993.
|
Who can sell me a replacement TV transmission cable or it may also be called by some a kick down cable for my 1993 Dodge w250 with the Cummins engine ??
|
Autofab aftermarket steering box mount
There is a company called Autofab in santee CA making an aftermarket steering box mounting bracket that is well built 3/8" thick gusseted & precision engineered, it is beefy as he'll and cleverly designed. The only issue was the mounting holes frame to bracket were a few 1000ths to small so i had to re-drill the 3 bolt holes but other than that it is a great product !
|
Originally Posted by inkedmike73
(Post 1078049)
Hey guys. I'm looking for an ECU for my 5.9L D250 turbo Cummins. My alternator isn't charging and my overdrive doesn't work along with odometer not working. Consensus shows that it's possibly an ECU. Anyone have a used one in good shape or know where I can get a decent one? Junkyard is out of the question they are all gone. Thanks! Please message me asap!
-Mike |
Originally Posted by flyingcrodeo
(Post 853518)
Ok why doesn't anybody like Painless Wire Harness or LMC truck not make parts for these 1st gen trucks? They make them for everything else but not the 1st gens. They go from 94 and up but nothing 93 and older???
|
Dana 60 front axle
Wanted in CA dana 60 front axle
|
All times are GMT -5. The time now is 10:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands