wanting to know what i can do to the wastegate if anything

 

wire it open

 

some help would be greatiy appreciated

---AutoMerged DoublePost---

it is interally wastegated

---AutoMerged DoublePost---

whats the afx maxxed no clue

 

X and C are too close on the key board that should be AFC maxxed


and is it the stock turbo the H1C?

 

If it's the stock turbo their is no wastegate. I put a 95 hx35 exhaust housing on my 93 and wired the w/g shut, but it's stock and I have full gauges. I wouldn't recommend it if you have done any mods

 

well i dont have any gauges but there is a little bit done to it

---AutoMerged DoublePost---

afc maxxed out means

 

haha sorry i fixed it now and what all is done to your truck

 

By the looks of your sig you should have put gauges in already so i would do that before you do anymore. And like timdale said if its your stock turbo you dont have a waste gate. If its not stock to build boost youd want to wire the waste gate closed not open. The afc is in your pump and it holds tension against your fuel pin. If you bottom it out it makes it easier for your fuel pin to get to its deepest point

 

ya guys sorry again i meant wire it shut wouldnt do much good if you wired it open