1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

Gasket Set

Thread Tools
 
Search this Thread
 
  #1  
Old 04-05-2010, 04:03 PM
mkriebs's Avatar
Diesel Wrench
Thread Starter
Join Date: Mar 2010
Posts: 512
Received 22 Likes on 20 Posts
Default Gasket Set

Hey guys, I am setting out to check my KDP this week, replace a water pump, and fix a few leaks on the front of my trusty ol' gal. I was wondering what gasket set I should use? I plan to replace all the front gaskets this week, and I might need some others for the rear later... I just need to clean it all up and see if its old fuel from the filter dripping, or oil.

So, what brand do y'all recommend? I have seen some guys say they use Fel-Pro, but I am one that would like to stick to OEM gaskets. Any pro's or con's to either? Is there a good place to get a whole kit?

Also, on the water pump... should I get one from Uh-Oh Zone, or should I spend the cash for OEM, or Napa... recommendations?

Thanks in advance guys!!!
Matt

---AutoMerged DoublePost---



Anyone?
 

Last edited by mkriebs; 04-05-2010 at 04:03 PM. Reason: Automerged Doublepost
  #2  
Old 04-05-2010, 04:06 PM
Benjamin's Avatar
Bombardier
Join Date: Mar 2007
Location: Da' Dirty South
Posts: 9,655
Received 607 Likes on 502 Posts
Default

get with these guys

PTC Power - Diesel Bombers

i bought a gasket set from them for my truck, top quality, excellent customer service, quick shipping..... i have nothing bad to say about them....
 
  #3  
Old 04-05-2010, 04:33 PM
mkriebs's Avatar
Diesel Wrench
Thread Starter
Join Date: Mar 2010
Posts: 512
Received 22 Likes on 20 Posts
Default

Thank you sir!
 
  #4  
Old 04-05-2010, 04:50 PM
Benjamin's Avatar
Bombardier
Join Date: Mar 2007
Location: Da' Dirty South
Posts: 9,655
Received 607 Likes on 502 Posts
Default

oh and they were cheaper than ANY of the prices i got from the local parts stores and fleet shops.....
 
  #5  
Old 04-05-2010, 04:51 PM
mkriebs's Avatar
Diesel Wrench
Thread Starter
Join Date: Mar 2010
Posts: 512
Received 22 Likes on 20 Posts
Default

Very nice! I just shot Cummins Guy out a PM, awaiting the reply. I take it this is OEM Cummins?
 
  #6  
Old 04-05-2010, 05:04 PM
big bad diesel 416's Avatar
Site Sponsor
Join Date: Apr 2009
Location: Lexington SC
Posts: 3,719
Received 636 Likes on 254 Posts
Default

i got OEM Cummins gaskets here if you get me your engine serial number i can PM you a Price
 
  #7  
Old 04-05-2010, 05:07 PM
mkriebs's Avatar
Diesel Wrench
Thread Starter
Join Date: Mar 2010
Posts: 512
Received 22 Likes on 20 Posts
Default

Big Bad... where do I find the serial #? Is it on the plate on the driver's side?
 
  #8  
Old 04-05-2010, 05:14 PM
big bad diesel 416's Avatar
Site Sponsor
Join Date: Apr 2009
Location: Lexington SC
Posts: 3,719
Received 636 Likes on 254 Posts
Default

yes right on the side of motor by the VE fule pump its a little metal tag with a bunch of writing
 
  #9  
Old 04-05-2010, 05:17 PM
mkriebs's Avatar
Diesel Wrench
Thread Starter
Join Date: Mar 2010
Posts: 512
Received 22 Likes on 20 Posts
Default

Thanks, I will take a look and PM you!
 
  #10  
Old 04-05-2010, 05:17 PM
big bad diesel 416's Avatar
Site Sponsor
Join Date: Apr 2009
Location: Lexington SC
Posts: 3,719
Received 636 Likes on 254 Posts
Default

ok thanks
 


Quick Reply: Gasket Set



All times are GMT -5. The time now is 07:53 AM.