1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

Truck dies if i don't keep my foot on the go petal

Thread Tools
 
Search this Thread
 
Old Mar 25, 2010 | 07:15 PM
  #1  
moneyman_09's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2009
Posts: 241
Likes: 4
From: Waterloo Indiana
Default Truck dies if i don't keep my foot on the go petal

I have 92 cummins that dies if i don't keep my foot on the petal. What would cause this?
 
Reply
Old Mar 25, 2010 | 07:15 PM
  #2  
DB Admin's Avatar
Banned
Joined: Mar 2007
Posts: 29,849
Likes: 3,297
From: Perry Co. Ohio
Default

too low of idle ?
 
Reply
Old Mar 25, 2010 | 07:20 PM
  #3  
moneyman_09's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2009
Posts: 241
Likes: 4
From: Waterloo Indiana
Default

When i first start it runs perfect. Its after it gets warm. that if i let off too far it dies. How would i turn up the idle
 
Reply
Old Mar 25, 2010 | 09:13 PM
  #4  
ArizonaRedneck's Avatar
BOMBARDIER
Joined: Oct 2009
Posts: 4,366
Likes: 240
From: arizona
Default

https://www.dieselbombers.com/5-9l-r...tion-pump.html check these how to videos out and see if it will help
 
Reply
Old Mar 28, 2010 | 12:25 AM
  #5  
moneyman_09's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2009
Posts: 241
Likes: 4
From: Waterloo Indiana
Default

so i went out and looked over my pump after watching these videos. I found out that my pump is retarded 1/4 inch maybe a little less and also that my fuel pin is ground down pretty far.

---AutoMerged DoublePost---

The truck however still dies if i fully let off the petal
 

Last edited by moneyman_09; Mar 28, 2010 at 12:25 AM. Reason: Automerged Doublepost
Reply
Old Mar 28, 2010 | 10:06 AM
  #6  
Richie O's Avatar
Diesel Enthusiast
Joined: Jan 2009
Posts: 267
Likes: 17
From: New England
Default

One sign of a worn out injector pump is for it to die at idle after its warm. They will idle fine when cold, but as it warms up the idle will drop. You can either idle up or turn in the fuel screw a little to counteract. Not saying that is the only answer.
 
Reply
Old Mar 28, 2010 | 08:39 PM
  #7  
moneyman_09's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2009
Posts: 241
Likes: 4
From: Waterloo Indiana
Default

I tried to advance the timing but i was only able to get the lines on the pump and the one on the block to line up. Is it normal for when the two are line up for the top of the pump to touch the block? I cannot move it anymore at all.

---AutoMerged DoublePost---

bump
 

Last edited by moneyman_09; Mar 28, 2010 at 08:39 PM. Reason: Automerged Doublepost
Reply
Old Mar 28, 2010 | 08:59 PM
  #8  
ArizonaRedneck's Avatar
BOMBARDIER
Joined: Oct 2009
Posts: 4,366
Likes: 240
From: arizona
Default

so after you moved it have you started it and have you been the only one to do any upgrades on your truck
 
Reply
Old Mar 28, 2010 | 09:05 PM
  #9  
moneyman_09's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2009
Posts: 241
Likes: 4
From: Waterloo Indiana
Default

Yea after i moved it i drove it 100 miles or so hauling a broke ford ranger it ran better but still feels like somethings not right. I have not done much to this truck myself besides put in a shift kit and move the pump yesterday. The guy who owned it b4 me put twin turbos on it ground the fuel pin removed the afc. put a intake horn from a 94 and removed the grid heater.
 
Reply
Old Mar 28, 2010 | 09:21 PM
  #10  
ArizonaRedneck's Avatar
BOMBARDIER
Joined: Oct 2009
Posts: 4,366
Likes: 240
From: arizona
Default

maybe he already had the timing advanced because if i am thinking correctly [and maybe not] cant you advance the timing with the front cover off with the fuel pump staying in the original position and then with it back together figure out its to far and retard the pump with out pulling the front cover again but when you ran it today or whenever did it get hot
 
Reply



All times are GMT -5. The time now is 08:13 AM.