fuel lines
Diesel Bomber
Joined: Aug 2009
Posts: 2,257
Likes: 186
From: CO
Good luck!
BOMBARDIER
Joined: Mar 2007
Posts: 11,159
Likes: 918
From: Gloucester, VA
just ordered my air dog II 165 from diesel auto power..... $599 shiped as far as i'v been told it comesw with everything you need.... 1/2" fuel line in take moduel, everything..... it's worth the $599.....
oh an to the guy that doesn't thing first gens benifit from 1/2, what makes you say that, 1/2" is a standard upgrade... flows way more fuel....aome of us ARE pushing a lot of fuel to our trucks means we need more flow 1/2" means more flow... i loose fuel press at half throttle with my 95gph fass..... so 1/2" isn't a waste
oh an to the guy that doesn't thing first gens benifit from 1/2, what makes you say that, 1/2" is a standard upgrade... flows way more fuel....aome of us ARE pushing a lot of fuel to our trucks means we need more flow 1/2" means more flow... i loose fuel press at half throttle with my 95gph fass..... so 1/2" isn't a waste
As for the 1/2 vs 3/8... Ever see the fuel passages inside the pump? Hell just look at the inlet hole....
Diesel Enthusiast
Joined: Jan 2010
Posts: 143
Likes: 6
From: central NC
so whit what is the best way to run the fuel system with the airdog should we bypass the filter housing and what about the fittings on the pump and the metel line is there a guide to doing this
Diesel Fan
Joined: Dec 2009
Posts: 74
Likes: 0
From: Kansas
EXCELLENT!
BOMBARDIER
Joined: Mar 2007
Posts: 11,159
Likes: 918
From: Gloucester, VA
thise same guys have been inside there pump to open up passages. I ran 3/8" lines on mine, but thats what I had laying around. If I had to do it again... I would run 1/2". do I need them now? No. Will I ever need them? Probably not. But if I do they are there.
BOMBARDIER
Joined: Mar 2007
Posts: 11,159
Likes: 918
From: Gloucester, VA
yes bypass your stock filter, all teh fittings shoudl be with the pump. Leave teh factory return line from you pump back. Dont mess with it at all.
Diesel Enthusiast
Joined: Jan 2010
Posts: 143
Likes: 6
From: central NC
so if we bypass the filter does that change the anything other than just the filter there what about the wif sensor and throwing codes from not useing that and is there anymore sensors in there and what about the vp and its connections, a good guide to doing this would be great is somebody can from the tank to the vp
