1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

Crazy Fuel Pump

Old Nov 28, 2009 | 06:49 PM
  #31  
muskrat's Avatar
Diesel Wrench
Joined: May 2009
Posts: 538
Likes: 39
From: Bitterroot Valley Mt
Default

Originally Posted by stillcummin
You can take out the silencer ring on the intake of the turbo.That will make it whistle adds air too.Youllbe over 250 if you turn your fuel screw a couple turns.
The H1c doesn't have a silencer ring.
 
Reply
Old Nov 28, 2009 | 07:31 PM
  #32  
1st genny nut's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Nov 2009
Posts: 251
Likes: 4
From: Murphy, NC
Default

thts wat i was bout to say they dont have a silencer ring only the hx35 and hy35's had them and yes it does add whistle cause my dad did it on his 2001
 
Reply
Old Nov 29, 2009 | 08:36 AM
  #33  
stillcummin's Avatar
Diesel Enthusiast
Joined: Apr 2009
Posts: 255
Likes: 2
From: Chardon,Oh(cleveland
Default

there are upgraded deliver valves you can buy that just install inplace of the old ones.allowing more fuel.Not sure if they ramp up pressure or not.
 
Reply
Old Nov 29, 2009 | 09:58 AM
  #34  
1st genny nut's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Nov 2009
Posts: 251
Likes: 4
From: Murphy, NC
Default

umm would a new fuel pin help ne hp wise?
 
Reply
Old Nov 29, 2009 | 01:00 PM
  #35  
DieselPerformanceGuy's Avatar
Diesel Enthusiast
Joined: Mar 2009
Posts: 301
Likes: 2
From: eastern wyoming
Default

ya the denny t stage 2 adds prolly 40 hp, soame with bullly dog or the old smokey pin, but don't get the bully dog its expensive and made of soft metal. but yea they help smoke alot too.
 
Reply
Old Nov 29, 2009 | 01:10 PM
  #36  
1st genny nut's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Nov 2009
Posts: 251
Likes: 4
From: Murphy, NC
Default

thnx ill look into it but right now i need to get some gauges
 
Reply
Old Nov 29, 2009 | 01:51 PM
  #37  
RSWORDS's Avatar
BOMBARDIER

Joined: Mar 2007
Posts: 11,159
Likes: 918
From: Gloucester, VA
Default

Originally Posted by stillcummin
there are upgraded deliver valves you can buy that just install inplace of the old ones.allowing more fuel.Not sure if they ramp up pressure or not.
not for the 1st gen, The non-I/Ced flow a tiny bit more but not worth teh effort.
 
Reply
Old Nov 29, 2009 | 01:51 PM
  #38  
RSWORDS's Avatar
BOMBARDIER

Joined: Mar 2007
Posts: 11,159
Likes: 918
From: Gloucester, VA
Default

Originally Posted by DieselPerformanceGuy
ya the denny t stage 2 adds prolly 40 hp, soame with bullly dog or the old smokey pin, but don't get the bully dog its expensive and made of soft metal. but yea they help smoke alot too.
Also look at teh M&H, they are a sponcor on here! Support those who supprt us guys!

Originally Posted by 1st genny nut
thnx ill look into it but right now i need to get some gauges
That should be your next step!
 
Reply
Old Nov 29, 2009 | 01:55 PM
  #39  
1st genny nut's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Nov 2009
Posts: 251
Likes: 4
From: Murphy, NC
Default

ya ik man but my dad keeps bucking me on them he doesnt think i need them
 
Reply
Old Nov 29, 2009 | 02:38 PM
  #40  
RSWORDS's Avatar
BOMBARDIER

Joined: Mar 2007
Posts: 11,159
Likes: 918
From: Gloucester, VA
Default

In My Opinion gauges should be on every truck from the factory.
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:15 PM.