hey all

i was thinking of getting a super hx 40 or the ats 3000 and i was wondering if i get the hx40 do i need the t3 flange or t4.I know i need a 4 inch down pipe, but do they only make them for 2nd gens or will i have to bend a second gen one.

also which turbo would better for dd/towing.

 

You need a T3 exhaust flange. DP I dunno, but getting one that bolts right up seems doubtful. Aftermarket 1st Gen parts were always scarce, getting more so I think...

 

If you get a HX40 get a T3 with a 16cm housing. Anything else is a doorstop.

 

ok thanks guys thats what i need to know and also i have an aftermarket exhaust and i have a 16cm exhaust housing on my h1c will it fit or are they all different.

 

Your 16cm has a 3" outlet.

 

ya thats the point because then i wont have to waste my money on a down pipe i'll just switch exhaust housings.

 

I wouldn't consider a 4" DP a "waste," especially when it is attached to an HX40!

I have a 4" DP attached to an H1C - now that's a waste.

 

o i see

---AutoMerged DoublePost---

but does anyone know if i should just get a 4 inch down pipe and if i do what kind do they make for 1st gens.

 

That I know of there's only the HX-40 style for the 2nd gen and 3rd gen trucks. I'll look it up tommorow!

 

ok thank you but do they fit on my first gen with the hx 40, or will i have to bend it