DennyT stage 2 fuel pin
 

Well got my gagues on order but won't be here till the week after next monday or tuesday. But was thinking of getting the fuel pin ordered and try and get it before this coming weekend of muddi gras, may 22-24. Was also going to take the air box lid off to help with alittle more air flow till I get cold air intake. I will be towing my 75' GMC mud truck for about 45-hour. Yall think ill be okay or no?

I would definately install the Denny-T pin and you really should get your 366 spring installed as that is really going to make a significant difference for you as much better RPM's, however if you do any upgrading before you get gauges installed, you really just have to be careful as to your EGT's and other component temps. It is nicer to have had a reference point before installing the other upgrades so you know what differences your really making, oh but of course, you will FEEL those anyway. :U: The lid-off is probably a good idea for a temporary until you change out the cold-air with after-market. I did that on my own and what a great difference it makes when I tow.

If you dont have your gages in I would not tow with ANY fuel mods, The DennyT pin would probably be fine but you never know how your truck is going to take it, they are all different. Did you read the info in your last thread about doing a BHAF and homemade mount for your air filter?

https://www.dieselbombers.com/1st-ge...tml#post338409

Yea im just going to wait till after I get my gagues installed to start the modifiing again.

Yes I did, but im probley just going to take the lid off for the weekend as I work all week because I requeted fri-sun. off for muddi gras.

are you in florida and are you on Chucks Trucks???

Yep

RSWORDS, you are absolutely correct, as all trucks and dependant upon what has already been done (upgrades) and what a person's application is, as I found out that after installing the Denny Stage II pin and the 366 spring, I certainly have more power however, heat-up is very quick to 1000 EGT, than for more than 3 minutes of acceleration, up hill, I go to 1100. For this pulling a 7-ton RV, I am now getting all the items together from your info you provided here at DB's for the valet swt installation. I think I need to do that before the next camping trip sir. Thank you for providing such great info to us all and for the even better detail in your steps, you always provide man!! :U:

Ya im in the same position, I haul my Mud truck a few time's a year, plus a pallet of satlt ever couple months and other than alittle towing/hauling she just get's me to school and work.

well them you should recognize me......i believe it was you that was PMing me every day asking me questions about it......

haha yea about. I was curious if it would be alright for the trip or not, but got my guages yesterday, hopefully my pillars show up today, than there gettting hooked up tommrow. Than next hopefully 16mm housing and fuel pin.