1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

91.5 w250 3 questions

Thread Tools
 
Search this Thread
 
  #1  
Old 11-11-2014, 10:50 AM
95xtracab's Avatar
Newbie
Thread Starter
Join Date: Nov 2014
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default 91.5 w250 3 questions

hey fellas i just got my first 91.5 w250 4x4 cummins with an auto. I'll get straight to the questions thanks for your help in advance.

Does anyone know where i can buy the stock wheel rings and center caps can't seem to find anyone parting one out or in the junkyards, i thought about 2wd center caps but not sure how they'd look. thanks I'm in northern california.

I have a electrical problem. keep blowing my power window fuses, parking brake light stays on, and the famous no overdrive. i put a ecm out of a ram charger in yesterday and the wait to start light started working and speedometer started working and my tps started to get voltage. no overdrive though, i will check the overdrive solenoid in a couple minutes and report back.

any advice heres my number 808 4 two 8 7291. thanks in in the bay area of california
 
  #2  
Old 11-11-2014, 01:08 PM
mknittle's Avatar
Diesel Fan
Join Date: Mar 2014
Location: california
Posts: 69
Received 0 Likes on 0 Posts
Default

If it is the dog dish hubcaps you are looking for watch the wrecking yards for 3/4and one ton vans. I was thinking if I could find four I could use a hole saw to cut the centers out of two to make fronts.
good luck hunting
 
  #3  
Old 11-11-2014, 01:58 PM
95xtracab's Avatar
Newbie
Thread Starter
Join Date: Nov 2014
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

i was thinking the same thing, probably what i will end up doing seems like all the pick n pulls they take the wheels and tires off before putting them in the yards!
 
  #4  
Old 11-11-2014, 10:47 PM
95xtracab's Avatar
Newbie
Thread Starter
Join Date: Nov 2014
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

well i wired up the toggle switch from my overdrive solenoid and it shifts perfect. what is the next step in the equation? when i pulled the overdrive solenoid plug just to check it out there was a little fluid on it? is that right?
 
  #5  
Old 11-12-2014, 05:54 PM
95xtracab's Avatar
Newbie
Thread Starter
Join Date: Nov 2014
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

also brake light is still on and windows keep blowing fuses, any help is appreciated
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ofelas
Show And Tell
3
08-18-2015 12:26 AM
Diesel Bombers
General Diesel Related
0
03-20-2015 08:20 AM
Diesel Bombers
General Diesel Related
0
01-13-2015 09:00 PM
Diesel Bombers
General Diesel Related
0
11-28-2014 09:50 PM
Diesel Bombers
General Diesel Related
0
11-12-2014 08:10 AM



Quick Reply: 91.5 w250 3 questions



All times are GMT -5. The time now is 12:00 PM.