Hx35 upgrade

Reply Subscribe

Thread Tools

Search this Thread

Aug 24, 2012 | 10:19 AM

Cow tipper

Thread Starter

Diesel Enthusiast

Joined: Jul 2012

Posts: 150

Likes: 3

From: Colorado

Hx35 upgrade

If I do swap my stock h1c turbo to a hx35 could I get stage 2 injectors for it?

Aug 24, 2012 | 09:57 PM

Olgrey93

Diesel Fan

Joined: Aug 2012

Posts: 11

Likes: 1

What is your plan for the truck. Daily driver. Pulling. Racing?

Aug 24, 2012 | 10:24 PM

Olgrey93

Diesel Fan

Joined: Aug 2012

Posts: 11

Likes: 1

What is your plan for the truck. Daily driver. Pulling. Racing?

Aug 25, 2012 | 10:52 PM

JBradley500

Diesel Enthusiast

Joined: Apr 2010

Posts: 220

Likes: 13

"stage 2" doesnt tell us anything about the injectors youre looking to buy. a link to them or any information you know about them would help a lot.

Aug 27, 2012 | 12:45 AM

Cow tipper

Thread Starter

Diesel Enthusiast

Joined: Jul 2012

Posts: 150

Likes: 3

From: Colorado

A daily driver but faster

---AutoMerged DoublePost---

Actually probably just some 5x0.14 80 hp injectors

Last edited by Cow tipper; Aug 27, 2012 at 12:45 AM. Reason: Automerged Doublepost

Aug 27, 2012 | 02:51 PM

Olgrey93

Diesel Fan

Joined: Aug 2012

Posts: 11

Likes: 1

I have a hx35 on my rig with pump tuning and a Dennyt pin. An it's pretty quick.

Aug 27, 2012 | 03:30 PM

biged681985

BOMBARDIER

Joined: May 2008

Posts: 5,567

Likes: 338

From: Yellville, Arkansas

5x.014 can get pretty warm on a hx35. I seen 2100+ in my 99 dodge with a 12v.

Aug 27, 2012 | 03:51 PM

biged681985

BOMBARDIER

Joined: May 2008

Posts: 5,567

Likes: 338

From: Yellville, Arkansas

Just seen yours is a ve. I was hittin that temp with a p-pump

Aug 27, 2012 | 09:08 PM

jwirth

Diesel Enthusiast

Joined: Jul 2010

Posts: 313

Likes: 26

From: South Carolina

5 x .014 are not 80 hp injector for one (140hp). Two 5x .014 on a 1st and a 2nd gen are not the same injectors different pop pressure. Hx 35 on and those injector will get very hot enough to melt pistons. I run a set of SDX 5x .014 140hp injectors with a hx35/40 and an over size intercooler and I can still cook the pistons if I hold it WOT if I wanted too. Hope you have Gauges before you start changing anything on your truck.