12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

whats next?

Thread Tools
 
Search this Thread
 
  #1  
Old 07-29-2012, 08:48 PM
chen's Avatar
Diesel Fan
Thread Starter
Join Date: Feb 2012
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Default whats next?

so i just installed my gsk and now i want more power and im just not sure what will give me the most power and still be able to drive the truck and tow with it so far all i have done is a fuel plate gsk exhaust intake and boost elbow oh ya and built trans any suggestions? thanks
 
  #2  
Old 07-30-2012, 10:16 PM
cummin_un_glued's Avatar
FormerVendor
iTrader: (1)
Join Date: Mar 2007
Location: Ash Flat Arkansas
Posts: 1,748
Received 107 Likes on 99 Posts
Default

do a different fuel plate
 
  #3  
Old 07-31-2012, 01:07 PM
12VALVECOUNTRYBOY's Avatar
Diesel Fan
Join Date: Feb 2012
Posts: 90
Received 0 Likes on 0 Posts
Default

A #100 or #0 fuel plate will wake her up. Mines got a 0 and she'll get up and go with a quickness!
 
  #4  
Old 07-31-2012, 08:23 PM
chen's Avatar
Diesel Fan
Thread Starter
Join Date: Feb 2012
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Default

i have a 100 ground already just havent put it in it i was thinking more along the lines of turbo injectors dv's or anything else that helps performance i wanna get her up around 400 horses if that helps
 
  #5  
Old 07-31-2012, 09:46 PM
cummin_un_glued's Avatar
FormerVendor
iTrader: (1)
Join Date: Mar 2007
Location: Ash Flat Arkansas
Posts: 1,748
Received 107 Likes on 99 Posts
Default

put the 100 plate in and some 5x14 injectors along with a S362 turbo then
 
  #6  
Old 08-01-2012, 09:39 AM
biged681985's Avatar
BOMBARDIER

Join Date: May 2008
Location: Yellville, Arkansas
Posts: 5,567
Received 338 Likes on 289 Posts
Default

With a 0 plate and 5x.014s on a 175 pump I layed down 433 and 1156 with my truck
 
  #7  
Old 08-02-2012, 08:32 PM
chen's Avatar
Diesel Fan
Thread Starter
Join Date: Feb 2012
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Default

alright if i do this will i have to do head studs and head gasket what about intercooler boots will i blow them off?

---AutoMerged DoublePost---

also how much of a difference will i notice if i do the 5x.014s and the s362?
 

Last edited by chen; 08-02-2012 at 08:32 PM. Reason: Automerged Doublepost




All times are GMT -5. The time now is 01:36 AM.