12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

Massive oil leak, need help

Thread Tools
 
Search this Thread
 
  #1  
Old 06-08-2012, 08:19 PM
Cordova2013-12 Valve's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Apr 2012
Location: Walker County, 'Bama
Posts: 138
Received 4 Likes on 4 Posts
Default Massive oil leak, need help

Alright, so Ive had this leak for awhile, but it recently got bad. Its somewhere behind the injection pump. I dont know if its a return line or what, but when you look behind the pump from the top between the IP and the block, its all completely clean from the hot oil. When the truck is running, you can see the blue haze coming from in there. When you look under the pump, you can see the right side of the block and all the front suspension is COVERED in grime, gunk, and oil. When its parked, I leave massive black stains. Im at a loss as to what to check. Ive tightened every line, nut, and bolt I can possibly get to without yankin the pump. Im losing near a quart and a half a week, driving maybe 20-30 miles a day. (a week being 5 days.) Any reccommendations? Tired of spending just as much money on oil, as I do on fuel.
 
  #2  
Old 06-08-2012, 08:36 PM
turbo2332's Avatar
Diesel Bomber
Join Date: Jun 2011
Location: Indiana
Posts: 2,171
Received 104 Likes on 101 Posts
Default

vacuum pump gaskets or injection pump gasket to case or case to block gasket. thats where our 90 is leaking from.
 
  #3  
Old 06-09-2012, 12:30 AM
Cordova2013-12 Valve's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Apr 2012
Location: Walker County, 'Bama
Posts: 138
Received 4 Likes on 4 Posts
Default

Its something pretty bad. I imagine im going to have to end up yanking the pump, but im trying to do everything I can to avoid that because I have absolutely no idea how to pull it
 
  #4  
Old 06-09-2012, 08:51 AM
turbo2332's Avatar
Diesel Bomber
Join Date: Jun 2011
Location: Indiana
Posts: 2,171
Received 104 Likes on 101 Posts
Default

is the front main in good shape?
 
  #5  
Old 06-09-2012, 12:15 PM
12vcummins96's Avatar
Administrator

Join Date: Aug 2009
Location: Pearland Tx
Posts: 5,765
Received 340 Likes on 273 Posts
Default

check the timing pin and see if it didnt fall out
it could be the tappet cover leaking
also have you done the kdp yet
 
  #6  
Old 06-09-2012, 02:08 PM
Cordova2013-12 Valve's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Apr 2012
Location: Walker County, 'Bama
Posts: 138
Received 4 Likes on 4 Posts
Default

Negative on the kdp. And yeah, the front mains in good shape.
 
  #7  
Old 06-11-2012, 03:01 AM
flatbedr's Avatar
Diesel Fan
Join Date: Sep 2011
Location: santa rosa ca
Posts: 39
Received 2 Likes on 2 Posts
Default

there is a oil feed line from the pump to a t goes in the block an down to vacuum power steering drive shaft housing. its a steel braided line with crimped on fittings. mine was leaking very bad from there. but the best way to find it is to clean very well an add oil dye. go drive for awhile an crawl under with a black light an yellow safety glasses an u will b able to see exactly where it is coming from. this is how we do it at the dealer. it will give u the source an the trail. good luck.
 
The following users liked this post:
Cordova2013-12 Valve (06-18-2012)
  #8  
Old 06-14-2012, 02:25 PM
Smokey Freedom's Avatar
Diesel Enthusiast
Join Date: Nov 2011
Location: Brookings SD
Posts: 115
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by flatbedr
there is a oil feed line from the pump to a t goes in the block an down to vacuum power steering drive shaft housing. its a steel braided line with crimped on fittings. mine was leaking very bad from there. but the best way to find it is to clean very well an add oil dye. go drive for awhile an crawl under with a black light an yellow safety glasses an u will b able to see exactly where it is coming from. this is how we do it at the dealer. it will give u the source an the trail. good luck.
dido! Done a lot of those lines over the years.
 
  #9  
Old 06-14-2012, 03:51 PM
93_Fummins's Avatar
Diesel Wrench
Join Date: Aug 2009
Location: Duncan, Oklahoma
Posts: 501
Received 48 Likes on 33 Posts
Default

Could it be the tappet cover gasket....?
 
  #10  
Old 06-18-2012, 12:13 AM
Cordova2013-12 Valve's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Apr 2012
Location: Walker County, 'Bama
Posts: 138
Received 4 Likes on 4 Posts
Default

Gonna do the dye ASAP. Thank you very much for that. For the record, I put a quart in the day I started this thread, and just tonight she easily drank my last reserves of a quart and-a-half.
 


Quick Reply: Massive oil leak, need help



All times are GMT -5. The time now is 02:48 AM.