Slow idle
#2
Hey Colton,
I just did mine yesterday because I was idling around 500 RPM in drive without the AC on. I looked around and found a few of these tutorials. One tip I recommend is to sit on the radiator support and look down the driver side of the block and you can see behind the linkage really well. Its a vertical bold that has a lock nut on the bottom side and the top bolt is on top of a little metal piece that is connected to the injection pump. Read over the tutorials a few times before you jump into it. Idle should be set around 750-800 in Drive WITH the AC on. Good luck!
One tutorial:
https://www.dieselbombers.com/12-val...lve-p7100.html
And another with pictures. I recommend this one.
Ram Diesel Problems
I just did mine yesterday because I was idling around 500 RPM in drive without the AC on. I looked around and found a few of these tutorials. One tip I recommend is to sit on the radiator support and look down the driver side of the block and you can see behind the linkage really well. Its a vertical bold that has a lock nut on the bottom side and the top bolt is on top of a little metal piece that is connected to the injection pump. Read over the tutorials a few times before you jump into it. Idle should be set around 750-800 in Drive WITH the AC on. Good luck!
One tutorial:
https://www.dieselbombers.com/12-val...lve-p7100.html
And another with pictures. I recommend this one.
Ram Diesel Problems
The following users liked this post:
Colton Carter (12-05-2011)
Thread
Thread Starter
Forum
Replies
Last Post