Hard start
#1
Hard start
I have a 98 12v that is not starting like it used to. I have to push the throttle where it used to start by just turning the key. Is there an adjustment on the P pump to make it start normal again?
Mods done - larger turbo, 5 hole injectors, fuel plate, full exhaust. Maybe more, I purchased the truck with everything done.
Mods done - larger turbo, 5 hole injectors, fuel plate, full exhaust. Maybe more, I purchased the truck with everything done.
#3
#4
#7
#9
My two month old Tork Tek adjustable OFV that was factory set at 32 psi is only reading 15 psi on my fuel pressure gauge. I adjusted it almost all the way in last night and got it up to 23 psi. I started it up this morning and it was at 30 psi till things warmed up a bit and it went back down to 23 psi. Could this be a lift pump related issue? (I don't even want to think about it being the P pump)
#10
I know with my brand new Tork Tek, I could only get my psi up to about 20 at best, no matter what else I did. It took me buying a used Airdog 150, and running that to get my pressure up to 40 psi. might have just been the fact that the factory lines were too restrictive?
I also deleted the fuel preheater, and got rid of that...it helped an air leak, but didn't help out much in the psi department.
I also deleted the fuel preheater, and got rid of that...it helped an air leak, but didn't help out much in the psi department.