12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

Cummins 12 valve 1400° OUCH help!

Thread Tools
 
Search this Thread
 
  #1  
Old 07-28-2011, 01:28 AM
dieselpower91's Avatar
Diesel Fan
Thread Starter
Join Date: Apr 2011
Location: ringgol, Ga
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default Cummins 12 valve 1400° OUCH help!

I need some help, I just put a new stock turbo on my truck, and I noticed my egts have been god awfull high, they were fine with the old turbo. But I was doing a burnout today and I looked at the guage and it was pegged to 1400. It stayed ther for maybe 10 seconds, then I let off the trottle and it died. I couldnt get it to turn over. It sounded like it was semi-seized up, but I kept cranking the motor over, as it would spin then stop tgen spin again., I did this for 30 minutes at least. and as it was cranking over I could hardly touch the throttle and it would stop cranking all at once, so I had my buddy pull me back to the house, while I was being pulled I thought I would try to crank it one more time , (its auto trans so no pop start) and it fired up and runs fine. Im confused, and need ideas as to why it did this and why my egts are so high.
 
  #2  
Old 07-28-2011, 07:39 AM
Whit's Avatar
Site Mascot
Join Date: Mar 2007
Location: Why-homing
Posts: 16,010
Received 940 Likes on 701 Posts
Default

maybe the wastegate was open or a boot is leaking........................what kinna boost pressure was you showing at the time?
 

Last edited by Whit; 07-28-2011 at 07:48 AM.
  #3  
Old 07-28-2011, 09:52 AM
dieselpower91's Avatar
Diesel Fan
Thread Starter
Join Date: Apr 2011
Location: ringgol, Ga
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

i was around 20-25psi which is weird because my old stock turbo i could hit 35 no problem, i cant even see 30 psi on this one.
 
  #4  
Old 07-28-2011, 10:00 AM
12vcummins96's Avatar
Administrator

Join Date: Aug 2009
Location: Pearland Tx
Posts: 5,765
Received 340 Likes on 273 Posts
Default

somthing is wrong with that charger
 
  #5  
Old 07-28-2011, 10:18 AM
dieselpower91's Avatar
Diesel Fan
Thread Starter
Join Date: Apr 2011
Location: ringgol, Ga
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

could a small leak or the wastegate not adjusted right be the problem?
 
  #6  
Old 07-28-2011, 11:08 AM
12vcummins96's Avatar
Administrator

Join Date: Aug 2009
Location: Pearland Tx
Posts: 5,765
Received 340 Likes on 273 Posts
Default

if your not getting the same amount of air in the motor then yes egts will be higher
 
  #7  
Old 07-28-2011, 11:34 AM
94 12valve's Avatar
Diesel Bomber
Join Date: Jan 2009
Location: Pylesville, Maryland
Posts: 3,504
Received 157 Likes on 142 Posts
Default

does the truck have a TC lock up switch?
 
  #8  
Old 07-28-2011, 08:55 PM
dieselpower91's Avatar
Diesel Fan
Thread Starter
Join Date: Apr 2011
Location: ringgol, Ga
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

no, i have just the overdrive that keeps it from shifting into fourth gear.
i have a triple disk converter idk if that has anything to do with it.??
 
  #9  
Old 07-28-2011, 09:10 PM
kingbrad89's Avatar
Diesel Wrench
Join Date: Jan 2010
Location: MEADVILLE PA
Posts: 500
Likes: 0
Received 36 Likes on 28 Posts
Default Cummins 12 valve 1400° OUCH help!

Its not a knock off cheap Chinese wannabe holset charger is it?
 
  #10  
Old 07-28-2011, 09:27 PM
dieselpower91's Avatar
Diesel Fan
Thread Starter
Join Date: Apr 2011
Location: ringgol, Ga
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

no its a new holset
what kind of turbo would i need to keep me running cool?
 


Quick Reply: Cummins 12 valve 1400° OUCH help!



All times are GMT -5. The time now is 08:28 PM.