I've got a injector with a return line bolt hole stripped and I was wondering if I could use the top half of my stock injectors with the bottom half and springs and shims off the stripped injector. The stripped one is a 5x14.

 

i wouldnt see a problem i guess sac and voc nozzles in a different body wouldnt hurt anything

 

you can do it ... would be a good idea to get them repoped before you reinstall it tho

 

It is a good idea to get them all popped checked and adjusted because only popping and adjusting one injector is not a good idea when all the other injectors may also be popping low.