12 valve won't start
#11
#12
dont do that u may want to try wat i told u if that dont work and u think u wanna try to try sprayin somethin use wd40 or get a rag wet with gas and put over the filter
#16
#17
#19
whats so horrible about ether? some 3.9 and 5.9 applications had ether injectors installed from the factory. just dont spray it on a hot grid heater. pull the little wires off the heater solenoids on the fender so they dont come on. if ur paranoid about a runaway problem take the intercooler pipe connector off at the intake so the ether will go right in and not get built up in the intercooler and then stir up any oil that may be laying in there. definitely dont spray any liquid like wd40 in the turbo. that will make it run away cause it wont even make it to the engine until its running and then will come all at once when the rpm is high enough.
---AutoMerged DoublePost---
btw, if u wanna see proof of what happens when u put non vaporizing things like wd40 in the turbo, come to newburg and ill show you a customers 24 valve i have torn down right now cause he put liquid in the turbo and it ran away after it started and messed up the cam and crank gears.
---AutoMerged DoublePost---
btw, if u wanna see proof of what happens when u put non vaporizing things like wd40 in the turbo, come to newburg and ill show you a customers 24 valve i have torn down right now cause he put liquid in the turbo and it ran away after it started and messed up the cam and crank gears.
Last edited by welderboy250; 12-18-2010 at 11:55 AM. Reason: Automerged Doublepost