12 Valve with schwitzer s300
#13
my clutch seams to be holding with a 0 plate and 32psi and iv got 35" tires... is it possible that my clutch is aftermarket? i know the truck makes alot more power then stock but lets be honest here, its still a relatively slow truck, are the stock clutches that bad in these trucks? i dont expect this clutch to last but it really just seems to take a beating and hold it, my driving style is pedal to the floor 80% of the time and its still holding .
#16
#17
#18
stock injectors, the star wheel is maxed out and the afc housing is all the way forward and theres no fuel plate. its a 94 so i guess i have the lower hp rated p7100. imo the truck doesn't really smoke much, a always thought these trucks ran a lot dirtier.
#19
in my opinion the afc ff and starwheel ff was not the most power for me and i have a 180 theres other stuff to do and everytime i run a no plate it seems slower and less smoke
---AutoMerged DoublePost---
ill sell u some brand new 370 marine injectors my trucks been parked and im gonna go even bigger even though i JUST bought them for 498.00 dollars been parked. i had them set up correctly and with 0.10 washers there in my truck i let my truck run two hours with them in it. no haze at idle a tad bit more smoke when i reved it full throttle pm me and we will talk
---AutoMerged DoublePost---
ill sell u some brand new 370 marine injectors my trucks been parked and im gonna go even bigger even though i JUST bought them for 498.00 dollars been parked. i had them set up correctly and with 0.10 washers there in my truck i let my truck run two hours with them in it. no haze at idle a tad bit more smoke when i reved it full throttle pm me and we will talk
Last edited by blazier18; 12-07-2010 at 06:59 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
Bill in Ballard
Ford 83-94 6.9 and 7.3L General
3
03-13-2016 07:42 PM
bonestock
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
02-01-2015 08:41 PM