new 12v : )
#31
#32
#35
#36
Step1- all bolts to 66 ft.lbs.
Step2- all bolts to 89 ft.lbs.
Step3- rotate all bolts an additional 90degrees
thats how the stock bolts are torqued. most will take step 3 to 135 ft/lbs. If you are going to retorque your head bolts make sure there not stretched out first or they could break
Also when your done you have to reset your valve lash
#37
#38
#39
on my 1st gen i have to undo the injector lines at the injectors and take out a couple of bolts that the injector line brackets are mounted with... then the injector lines will move out of your way. if you dont do that you cant get to a hand full of bolts. also youll need to undo one small hose (i believe for the heater core lines) to get to bolt number "26".