12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

heater grid relay

Thread Tools
 
Search this Thread
 
  #1  
Old 11-09-2010, 10:01 AM
cumminspwr11's Avatar
Diesel Wrench
Thread Starter
Join Date: Apr 2010
Location: arizona
Posts: 579
Likes: 0
Received 10 Likes on 10 Posts
Default heater grid relay

last year my truck had a wired electrical issue were everything electriconic got fried, the intake that bolts to the heater grid got so hot that the paint was bubbling up on it so i unhooked the relays as a safety measure- well now it is finally getting cold here and my truck doesnt like to start to well, last winter i plugged it in every night and it started fine, i think i have a bad IP because i have checked my injectors and even changed them and it still has the same problem

can i use a glow plug relay for a 7.3 to run my heater grid or should i find factory replacement ones?
 
  #2  
Old 12-31-2010, 07:33 AM
glfredrick's Avatar
Diesel Enthusiast
Join Date: Mar 2010
Posts: 238
Received 34 Likes on 28 Posts
Default

The relays are simple on/off units that can be replaced with a generic starter relay for under $10 each. Usually older Fords or Jeeps will work.

Make sure the type relay you get doesn't ground through the case though. I got some and they did that -- Dodge does all its switching through grounds intstead of hot wires, so a grounded relay will switch the system. I mounted mine on some insulated material to break the circuit.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dodge2014
1st Generation Dodge Cummins 89-93
2
04-16-2015 08:54 PM
robbyS
5.9 Liter CR Dodge Cummins 03-07
3
04-16-2015 02:22 PM
95 cummin
12 Valve 2nd Gen Dodge Cummins 94-98
0
01-21-2015 11:54 AM
Low_Life_Style
5.9 Liter CR Dodge Cummins 03-07
16
11-29-2014 06:28 PM
justinsbeck
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
11-22-2014 03:03 AM



Quick Reply: heater grid relay



All times are GMT -5. The time now is 07:23 PM.