12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

No Power

Thread Tools
 
Search this Thread
 
  #1  
Old 10-05-2010, 10:28 PM
12valveguy's Avatar
Newbie
Thread Starter
Join Date: Oct 2010
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default No Power

I have a stock 96 and its lacking power. On hills it wont do over 50 MPH when floored. It starts great, idles great, and run great. It only blow a little smoke on cold starts. Any ideas where to start?
 
  #2  
Old 10-05-2010, 11:34 PM
12vcummins96's Avatar
Administrator

Join Date: Aug 2009
Location: Pearland Tx
Posts: 5,765
Received 340 Likes on 273 Posts
Default

fuel filter
 
  #3  
Old 10-06-2010, 09:24 AM
12valveguy's Avatar
Newbie
Thread Starter
Join Date: Oct 2010
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

Just did the fuel filter and prefilter. Maybe I need to look inside the tank.
 
  #4  
Old 10-06-2010, 10:04 AM
big willy's Avatar
Diesel Wrench
Join Date: Aug 2009
Location: Columbia, Tn
Posts: 730
Received 38 Likes on 24 Posts
Default

build your tranny and figure out what your goals hp wise are and build it that way so you don't just go get a full builet tranny and not need it and then get gauges and then go from there
 
  #5  
Old 10-06-2010, 01:13 PM
BIG NIG's Avatar
Diesel Enthusiast
Join Date: Mar 2010
Location: N. Idaho
Posts: 182
Likes: 0
Received 5 Likes on 5 Posts
Default

have the timing bumped to 15.5 and see how it runs......wile your at it move the plate
 
  #6  
Old 10-06-2010, 01:19 PM
ktfroy's Avatar
Diesel Fan
Join Date: Apr 2009
Location: Homeville, Pa
Posts: 38
Received 1 Like on 1 Post
Default

What's your fuel pressure like? I had the no power on hills thing and it was my lift pump going bad.
 
  #7  
Old 10-06-2010, 05:51 PM
12valveguy's Avatar
Newbie
Thread Starter
Join Date: Oct 2010
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

I dont have a way to measure fuel pressure
 
  #8  
Old 10-06-2010, 09:20 PM
blazier18's Avatar
Diesel Bomber
Join Date: Jul 2010
Location: knox county tn
Posts: 1,176
Received 28 Likes on 28 Posts
Default

straight pipe and cold air intake is a start if theres no mechanical problems. on top of that its a 3:55 gear aint it. mine was like that too. do you know where the afc housing is?
 
  #9  
Old 10-06-2010, 09:37 PM
12valveguy's Avatar
Newbie
Thread Starter
Join Date: Oct 2010
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

I dont know anything about AFC. I did notice that the pamper proof bolt is still on the cover.
 
  #10  
Old 10-06-2010, 09:54 PM
Heavy Smoker's Avatar
Diesel Fan
Join Date: Sep 2010
Location: Lockport NY
Posts: 67
Likes: 0
Received 1 Like on 1 Post
Default

no o/d?
 


Quick Reply: No Power



All times are GMT -5. The time now is 08:10 PM.