need help about overdrive ground switch
#1
need help about overdrive ground switch
i have a 97 cummins and im trying to get my overdrive to work as well as install a tc lockup switch and when i ground a wire i lose my tack and the light flash on the dash could someone that knows more about this call me please im pulling my hair out!!!
208 880 1132
Zeb thanks
208 880 1132
Zeb thanks
#4
#5
#6
hum that doesnt sound right at all, if your just piggy backing like that then you just need to tap into the correct wire for lock-up and od, run them to two switches and ground the other side of the switches, i have a diagram for the wire connector on the trans i will try and find, so you can make sure you have the right wires
have you checked you fluid and dropped the pan to see if there is any debris in there?
have you checked you fluid and dropped the pan to see if there is any debris in there?
#7
what wires do you tap as i understand it on my 97 i tap the orange wire and the orange green wire well there are only two orange wires so i tapped the two well hmmm if i could get a phone number of someone that knows a little bit and wouldn't mind hearing me explain i did try a few thangs and nothing is making sense
#8