When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
might consider the push rod/tappet cover. i've got one that was so bad that when i steam cleaned it it ended up with water in the oil. it had several problems also.
I had the same problem with the gear cover bolts backing out. Even re-tightening them only slowed the leak a bit. It leaked down the cover, hit the balancer, then slung oil all over the front of the motor and sway bar/crossmember.