What size is our stock exhaust?
#1
#2
3" When I first got my truck the muffler was rattling so I got a 3" chunk of exhaust with flares on either end and some band clamps. I hated it like that. Bought a 4' and liked it a whole lot better. FYI, there are some sponsors here selling 4" exhausts for a bit over $300 (IIRC)...
Last edited by Dr. Evil; 03-05-2010 at 01:54 PM.
#3
#4
#5
#7
#8
#9
#10
ThIs is another thing you can do yourself if you wanna do it on the cheap! It's def 3", just take a sawsall and hack the cat and muff out in one piece and measure the section when it comes out. Head down to napa and get the according length of pipe with two stainless steel band clamps. Put the pipe in place and bolt the clamps tight done! No hangers required since there is hardly no weight there.
---AutoMerged DoublePost---
Oh and btw NEVER buy anything from FarmBoy he is a pos and rips people off and says he makes alot of stuff none of which is tru. My 2 cents
---AutoMerged DoublePost---
Oh and btw NEVER buy anything from FarmBoy he is a pos and rips people off and says he makes alot of stuff none of which is tru. My 2 cents
Last edited by Red_Rattler; 03-06-2010 at 12:31 PM. Reason: Automerged Doublepost