just got the truck, went to change fluids and there is no stick on the dipstick, just the cap that says "oil"... Can anyone tell me how long their stick is? from the cap to end? and how many inches up the stick is the add mark?

 

can you pull your dipstick tube and make sure its not in the tube somewhere that would be one of the first things you need to do if you havent done that already

 

Thats the second reply from you man, and a great idea! Ill do it in the am, and I really appreciate you being here!

 

dang it redneck, i was gonna say that

let me know if its in there or not, and ill get a measurement for ya off a buddys 97 if it aint.

 

well thanks man, I couldnt sleep and pulled the tube out and its blanko... I got a cummins stick from an IDM??? motor, but it is definatly too long. I could easily cut it to fit with those digits if it isnt too much trouble

 

Hey guys, anyone getta chance to measure the stick lenght and add oil mark height from bottom yet? trucks been sitting scince I removed the tube. thanx

 

Mine was 45 3/4 inches total and the safe line was 3 1/4 from the end

 

Man I cant thank you enough 12valvecory

 

no problem hope get your truck where you want it

 

sounds like you got the problem fixed but for in the future and for all you guys looking to buy a truck make sure you check the oil trans and coolant before you buy. sometimes looking at these things is a good indecation of how the previous owner treated the vehicle.