wanting to up boost
#11
12-20-2009, 06:31 PM
Diesel Wrench
#12
12-20-2009, 07:04 PM
i have the stock turbo ... to my knowledge .... holset right ... looks stock and doesnt look like anything different ... and had the silencer ring in it like ones i have seen ... any pics of were the elbow is i dont see it
---AutoMerged DoublePost---
the only 90 i see thats in line wit the wastegate is on the side of the block with a line running to the back of the afc housing were the waste gate line attaches
---AutoMerged DoublePost---
the only 90 i see thats in line wit the wastegate is on the side of the block with a line running to the back of the afc housing were the waste gate line attaches
Last edited by mylilpwny; 12-20-2009 at 07:04 PM. Reason: Automerged Doublepost
#13
12-20-2009, 07:32 PM
Diesel Wrench
does the line from the back of the afc housing T and run to the wastegate? or you could just cut the hose rite next to the wastegate and plug both of them
---AutoMerged DoublePost---
i think your truck different, than mine
http://www.xtremediesel.com/manuals/1040310ORIFICE.pdf
---AutoMerged DoublePost---
i think your truck different, than mine
http://www.xtremediesel.com/manuals/1040310ORIFICE.pdf
Last edited by wes-cummins; 12-20-2009 at 07:32 PM. Reason: Automerged Doublepost
#15
12-20-2009, 07:52 PM
#16
12-20-2009, 08:02 PM
Diesel Wrench
yea urs different than mine. pinch off the line by the waste gate with somthing, or cut it and plug both ends. otherwise i think that yours does T by the injector pump so you could take it off there. but you do need to have a boost line hooked up to the afc.
---AutoMerged DoublePost---
yea yours is different than mine. pinch the line off by the waste gate, or cut it and plug both ends where you cut it. or take it off by the pump and plug it. but make sure that the afc housing still sees boost
---AutoMerged DoublePost---
yea yours is different than mine. pinch the line off by the waste gate, or cut it and plug both ends where you cut it. or take it off by the pump and plug it. but make sure that the afc housing still sees boost
Last edited by wes-cummins; 12-20-2009 at 08:02 PM. Reason: Automerged Doublepost
#17
12-20-2009, 08:06 PM
there is a 90 that comes off the block like right under the intake horn and a line goes from that to the fitting on the back of the afc housing that the waste gate plugs into .. its a t fitting and the front if in the afc ... top is the waste gate line and the back is the one from the block ... the 90 elbow is straight back from the boost gauge plug ... would that be it ?
---AutoMerged DoublePost---
is that not the stock 97 turbo ? wat year turbo is that or wat is it ?the tag says model is HX35w
---AutoMerged DoublePost---
is that not the stock 97 turbo ? wat year turbo is that or wat is it ?the tag says model is HX35w
Last edited by mylilpwny; 12-20-2009 at 08:06 PM. Reason: Automerged Doublepost
#19
12-20-2009, 08:09 PM
