I was tought to do the gov springs by soft and hard clicks not the mic

 

How tight should they be

 

1 soft click and 4 hard clicks, then make sure the valve locks are faceing the same way

 

my 40foot does the same at 30 35 so no worrys put another trailer on there and it wont do it

 

It does it with a 30 foot to. It only seems to be 5th wheels tho

 

maybe driveline angles

 

did you ever fix this problem bc im having the same problem at about 1800 to 2000 rpms in 3rd gear. Any advice helps thanks

 

I have a 97 with the 47re and mine does it in third gear (locked) between 30 and 40 mph. It feels like my truck is gonna fall apart. and its only with easy throttle while its slowly building boost. I cannot figure it out. Im not pulling a thing either. it feels like i have a manual with a bad clutch thats chattering. its very annoying. If anyone has any ideas please let me know.

 

i hope that someone can help us out bc im clueless. so yours does it when the truck is unloaded? someone said earlier it could be governor springs i may give that a try

 

Yes when its unloaded. I havent pulled anything since it started happening. Its just weird that its only in third. If i floor it in third with the tc locked it does one big shake then stops doing it. i thought about the springs but why would it only do it in third?