Lift pump tick or not?
#24
FIX the TIX TIX TIX TIX TIX ?
I took care of my KDP this weekend, it was snug as a bug, but at least the shiney custom made washer will give me some peace of mind. And I had a crankshaft pulley leak anyway, it would have saved me some time to know to shove that plastic collar all the way to the wide part inside the seal to get it over the crankshaft. Stupid Felpro didn't give dummies like me instructions. I popped the seal out of the cover 3 times trying to get it on. It was like trying to use a thimble as a condom and just as painful.
Anyway, is there a cheap way to fix this ticking noise? Did my #10 fuel plate cause it or any other damage?
Anyway, is there a cheap way to fix this ticking noise? Did my #10 fuel plate cause it or any other damage?
#27
Dont quote me on this and I am not even sure if it is right or not but I have heard that some of the ticking in the cummins can come fromthe gears on the front of the engine the cam, injection pump ect being that they are straight cut gears... Has anyone heard of this or know if they can cause the noise?
#28
#29
I got too ticked at the......tick, tick,tick,tick
$140 later my tick is gone. Who ever suggested pushing the primer pump to see if the Lower Pump was causing the ticking was right. It stops ticking with a push while running. I replaced my LP in about 2 hrs. But I had removable wheel wells which gives me easy access to the sides of my cummins. I feel bad for the guy who has a real ram and not a whacked out mod like mine. Thank god the engineers made the pushrod on the LP softer than the cam lobe. ( I hope). Im not sure the contact between the pushrod and cam was the problem, didnt look worn, cupped, or mushroomed. When I push in the pushrod on the LP and let it spring back it makes a familiar click and gives me flashbacks. hmmmmmmm. I replaced the Cunningham brand LP with an Airtex brand LP from Oreilys. Does it matter?
So far, no ticking, no worries about a 140k mi LP, although I didn't have gaskets and used the orange RTV instead, should work ok? right? RIGHT? Oh well whats another oil leak? The tick is dead! Worth $140 and 2 hours of cussing for my sanity and love of Saint Cummins. Ahhhhhhhhhhhh.
So far, no ticking, no worries about a 140k mi LP, although I didn't have gaskets and used the orange RTV instead, should work ok? right? RIGHT? Oh well whats another oil leak? The tick is dead! Worth $140 and 2 hours of cussing for my sanity and love of Saint Cummins. Ahhhhhhhhhhhh.