timing tool kit for pump timing
#1
timing tool kit for pump timing
i just bought the dial indicator and puller for the pump. it was 150, and looks to be good i will tell yall how it works out when i get it here and i set my timing with it...
Timing tool kit for Dodge Cummins P7100 fuel pump:eBay Motors (item 320404574750 end time Aug-25-09 17:51:16 PDT)
Timing tool kit for Dodge Cummins P7100 fuel pump:eBay Motors (item 320404574750 end time Aug-25-09 17:51:16 PDT)
#2
#3
any ideas on where to get that?
---AutoMerged DoublePost---
is there anything stopping me from useing a good ole fashion pair of vise grips? i mean is the torque spec on the dv cap that critical? i could deffinatley get me a good pair of grips on there and take her off slick as can be but its the puttin it back on at the right apec that would worry me a little...not much but a little
---AutoMerged DoublePost---
is there anything stopping me from useing a good ole fashion pair of vise grips? i mean is the torque spec on the dv cap that critical? i could deffinatley get me a good pair of grips on there and take her off slick as can be but its the puttin it back on at the right apec that would worry me a little...not much but a little
Last edited by jaybuller; 08-09-2009 at 07:27 PM. Reason: Automerged Doublepost
#4
#5
You need yhe socket. Dont want to booger it up - might be hard to find a replacement.
The cheapest on Ive found was here:
http://www.peakdieselperformance.com...56/5380171.htm
The cheapest on Ive found was here:
http://www.peakdieselperformance.com...56/5380171.htm
Thread
Thread Starter
Forum
Replies
Last Post