12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

HOOKIN CHAINS

Thread Tools
 
Search this Thread
 
Old Mar 30, 2009 | 10:31 PM
  #1  
392hemix's Avatar
Thread Starter
|
Diesel Wrench
Joined: Feb 2009
Posts: 528
Likes: 10
From: New Hampshire
Default HOOKIN CHAINS

I have not done much chain hookin, but i did hook up to my buddies 12 valve the other day, hes got the 5spd and i have an auto, what do you guys suggest i pull in? Over drive off or on? and should i start in 1st and manually shift threw the gears? I keep od off most of the time just cruisen around town and up big hills and i only have od on when im on the highway. I am going to put a lock up swich in but i want to upgrade my trans first b4 i blow it up
 
Reply
Old Mar 30, 2009 | 10:34 PM
  #2  
collinscummins's Avatar
Diesel Enthusiast
Joined: Mar 2009
Posts: 120
Likes: 0
From: Oregon
Default

I would say start out in first gear and leave overdrive off. I have never hooked chains before and i dont really want to as it is so hard on stuff. You should beat him though just because he has a manual.
 
Reply
Old Mar 30, 2009 | 10:41 PM
  #3  
Red_Rattler's Avatar
High Tech Redneck

Joined: Nov 2007
Posts: 6,730
Likes: 496
From: Columbus WI
Default

I thought you were trying NOT to break your truck All you should need is first, don't spin your tires or you will lose, which is why u want him to break traction first then floor it. But with an auto u should win hands down....
 
Reply
Old Mar 30, 2009 | 10:45 PM
  #4  
Coco2992's Avatar
Diesel Enthusiast
Joined: Nov 2008
Posts: 249
Likes: 5
From: Weatherford, texas
Default

be ready to throw into N with you start to lose or you will tear up that tranny in a heartbeat
 
Reply
Old Mar 30, 2009 | 11:07 PM
  #5  
392hemix's Avatar
Thread Starter
|
Diesel Wrench
Joined: Feb 2009
Posts: 528
Likes: 10
From: New Hampshire
Default

haha, ya. I don't hook up unless i know i will win! i just wanted to make sure i was not hurting the trans and getting the best low end power quick! i know the faster the converter locks up the more trq i will put to the wheels
 
Reply
Old Mar 30, 2009 | 11:24 PM
  #6  
Coco2992's Avatar
Diesel Enthusiast
Joined: Nov 2008
Posts: 249
Likes: 5
From: Weatherford, texas
Default

duhh what was i thinking
 
Reply
Old Mar 30, 2009 | 11:30 PM
  #7  
392hemix's Avatar
Thread Starter
|
Diesel Wrench
Joined: Feb 2009
Posts: 528
Likes: 10
From: New Hampshire
Default

you have to love thoes cocky gasser guys.
 
Reply
Old Mar 30, 2009 | 11:31 PM
  #8  
Red_Rattler's Avatar
High Tech Redneck

Joined: Nov 2007
Posts: 6,730
Likes: 496
From: Columbus WI
Default

The tranny will get hot for sure if it lasts alil bit because you will be basicly just preloading it like your doin a boosted launch waitin for the other truck to break loose.. Air your tires down as well for a better and more grippy foot print.
 
Reply
Old Mar 30, 2009 | 11:33 PM
  #9  
xzaq103's Avatar
FormerVendor
Joined: Jun 2007
Posts: 3,196
Likes: 136
From: Fayetteville AR
Default

SNAP goes your input.... OD locked out and let it shift up as needed. try not to loose traction and make sure you have the cash in your pocket for some new trans parts.
 
Reply
Old Mar 31, 2009 | 12:07 AM
  #10  
392hemix's Avatar
Thread Starter
|
Diesel Wrench
Joined: Feb 2009
Posts: 528
Likes: 10
From: New Hampshire
Default

Nope, i dont. i don't even have money for food.
 
Reply



All times are GMT -5. The time now is 03:23 AM.