|
Originally Posted by The Ram Archer
(Post 64586)
1) Comparing the pic with the drawing, in particular looking at the position of the two screws on top, this looks to me as if the photographed plate was heavily cut below the "0" profile. Is that true, and if so, what specific function(s) has the chosen profile?
3) What are the "specs" of the various plates (maybe this will contribute to the decision making for interested novice bombers) Thanks Tom |
The pic and drawing aren't the same plate. The picture is of a #4 plate which is the most aggressive out there outside of #0. PDR Cam plate HP guide.
|
i have a home ground 0 full forward and its not enough fuel for me, not very smokey my max egt's are 1200 and i have to have it to the floor for a while going up hill to hit that. but i did throw down 253rwhp with just a 0 plate and bhaf and stock exhuast straight piped. if my tranny didn't slip i coulda done better but oh well.
|
Nate, not trying to argue, but how is a #4 plate more aggressive than a 100? because it fuels more in/out of shifts when it comes to having an auto? or what? Explaination would be grand!
|
1 Attachment(s)
|
I'll say I haven't seen too many commercial plates, however, the pictured plate would be more aggressive than a 100 plate and here's why. Generally when folks make their "100", they grind the main face even with the face of the top plate, just like a "0", but then hook the bottom. The hook on the bottom is what gives it it's hybrid state bewteen a "0" and a "10"...hence "100". The pictured plate clearly is cut deeper than that. So much so, that there isn't much material left around the rivets. Don't let the the shallower portion above that fool you though, as it never sees the gov arm. This plate really doesn't defuel much once off idle. Gov arm travel is usually no more than 3/8 to 7/16 up the plate from point of contact. This also makes adjustment of the plate and gov arm crucial so as not to underdive the plate nose.
Sorry Archer I couldn't answer #3 for ya, but I tried #1. Chris |
Any new info on this topic, this is alot of good information! :c:
|
QUESTION: if ya grind a stock plate into a 100 how far fowaard is a safe ? and what are the dimensions of the hook on the bottom? or is it just a good guess, currently i have my stock plate full foward, oh and will you have to reset your govenor arm as well???? :voodoo: plan on doing it as soon as this hurricane passes
|
We ran ours with no Fuel Plate for a long time :choochoo:
|
isnt running without a fuel plate dangerous ? like the possibility of a runaway???:se:
|
| All times are GMT -5. The time now is 08:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands