12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

Will 37s Fit?

Old Jun 15, 2008 | 08:58 PM
  #1  
Monster Truck's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Mar 2007
Posts: 280
Likes: 4
From: Kingston, WA
Default Will 37s Fit?

Will 37-14.50-16'' toyo mts fit under my truck? Im ok with some rub but I dont want it to be stupid. Ive got quite a bit of offset already and Im clearing 35s with no problem.
 
Reply
Old Jun 15, 2008 | 09:02 PM
  #2  
2500HeavyDuty's Avatar
Super Moderator
Joined: Oct 2007
Posts: 14,872
Likes: 764
From: Houston, Tx
Default

i think bigblue12 has 39.5 inch iroks on his truck with 5 inches of lift. he did some trimming though
 
Reply
Old Jun 15, 2008 | 09:47 PM
  #3  
slowtowpig's Avatar
Diesel Bomber
Joined: May 2008
Posts: 1,054
Likes: 87
From: TexaS
Default

to much of an offset will cause a tire to rub also, but i thank you will be fine tho
 
Reply
Old Jun 17, 2008 | 02:19 AM
  #4  
Cumminscowboy_101's Avatar
Diesel Enthusiast
Joined: Jun 2008
Posts: 207
Likes: 8
From: Ft. Campbell, KY
Default

I would just like the opportunity to say...I have no idea.
 
Reply
Old Jul 2, 2008 | 01:51 PM
  #5  
nmlakerat's Avatar
Diesel Enthusiast
Joined: May 2008
Posts: 286
Likes: 13
From: Albuquerque, NM
Default

37's will fit with 5 inches of lift and fender cutouts or fiberglass fenders for baja trucks. unless you run a factory backspace wheel and you get them under it. truck in avatar has 3 inch lift and fenders factory backspace wheel and 37's but its an 03
 

Last edited by nmlakerat; Jul 2, 2008 at 01:54 PM.
Reply
Old Jul 2, 2008 | 06:31 PM
  #6  
MotorOilMcCall's Avatar
Diesel Bomber
Joined: Dec 2007
Posts: 1,202
Likes: 58
From: Buffalo, NY
Default

They'll be close. You'll definitely rub at full lock, but hopefully just on the fender liners, it depends on what backspacing. You may need to trim the front bumper a little, and the back part of your wheel well. One other thing I noticed in your sig, no mention of an upgraded track bar. With 37's, your gonna wanna give Don Thuren a call and have him fab you up a new one, otherwise your gonna toast the one that came with your lift in a hurry. Might wanna look into a set of 4.10's to replace the 3.54's you have, it'll give your ride a little more pep off the line.
 
Reply
Old Jul 2, 2008 | 09:28 PM
  #7  
sidekick's Avatar
Diesel Bomber
Joined: Feb 2008
Posts: 1,368
Likes: 41
From: Gloucester Va.
Default

I have 37x 12.50 with 6" and lots of clearance if needed stack a leveling kit on the lift spirngs
 
Reply
Old Jul 23, 2008 | 11:49 AM
  #8  
nmlakerat's Avatar
Diesel Enthusiast
Joined: May 2008
Posts: 286
Likes: 13
From: Albuquerque, NM
Default

I personally do Not recomend stacking a leveling kit under lifted springs.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
landon025
5.9 Liter CR Dodge Cummins 03-07
6
Sep 8, 2015 09:21 PM
Jsully
12 Valve 2nd Gen Dodge Cummins 94-98
0
Aug 31, 2015 07:55 PM
CumminsAtYa
6.7 Liter Dodge Cummins 07.5-12
0
Apr 23, 2015 04:20 PM
carmel
Ford Powerstroke 03-07 6.0L
0
Mar 20, 2015 09:25 PM
Supremedragonx
6.7 Liter Dodge Cummins 07.5-12
1
Mar 1, 2015 01:50 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:01 AM.