12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

Clutch question

Old May 5, 2016 | 03:01 PM
  #1  
logan zachman's Avatar
Thread Starter
|
Newbie
Joined: Feb 2016
Posts: 2
Likes: 0
From: minnesota
Default Clutch question

I have a 97 Dodge Cummins with a five speed and my clutch is slipping really bad I've been looking at clutches and found a brand called grip force clutch is this brand good it says it can stand up to 500hp and 790 foot pounds of torque. It uses a luk fly wheel and comes with a pressure plate and clutch disk all for $450
 
Reply
Old May 5, 2016 | 08:35 PM
  #2  
diesel pap's Avatar
Site Sponsor - Mighty Diesel
Joined: Dec 2008
Posts: 4,184
Likes: 213
From: West Virginia
Default

i have sold many clutches and south stands up. very few problems with them.
 
Reply
Old May 5, 2016 | 11:16 PM
  #3  
Jet A Fuel's Avatar
Diesel Bomber
Joined: Aug 2009
Posts: 1,981
Likes: 347
From: Georgia
Default

Hey Tony the Valair 13" kevlar you sold me is still holding up good. I have never heard any bad things about Southbend either. I used a grip force and it was ok but didn't hold very long pulling the fifthwheel. I think it was just a stock replacement grip force.
 
Reply
Old May 8, 2016 | 02:42 PM
  #4  
Jmrobinson's Avatar
Diesel Enthusiast
Joined: Aug 2015
Posts: 125
Likes: 6
From: Boise city Oklahoma
Default

I bought a 13 inch Kevlar ceramic Valair and I'm very happy with it, it jumps a little while backing up but still very easy to control and once your used it it's incredible.
 
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:34 AM.