Diesel Bombers - Dually swap????

Page 2 of 2

Show 40 post(s) from this thread on one page

Diesel Bombers (https://www.dieselbombers.com/)

- 12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)

- - Dually swap???? (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/124697-dually-swap.html)

coors_man_2005

12-17-2014 07:53 PM

My truck that I pulled the axles from was a 94 c&c factory drw so that explains why mine is narrow

Brokencummins

04-19-2015 10:26 PM

Quote:

Originally Posted by kubiak (Post 1081783)

i just switched from dually to single wheel and my dually axle is 4 inches wider than the single wheel. my truck is a 97 3500 4x4. i built a flatbed for it so it doesnt matter much though.

Could you use the same drive shafts???? My friend has a dually and we wanna switch beds and rears but not sure on the drive shafts

kubiak

04-20-2015 08:43 AM

Quote:

Originally Posted by Brokencummins (Post 1090898)

Could you use the same drive shafts???? My friend has a dually and we wanna switch beds and rears but not sure on the drive shafts

i would think they should take the same driveshafts but not 100% sure anyone know for sure?

u2slow

04-20-2015 01:05 PM

Driveshaft stays the same SRW to DRW... the exception is going between different series axles i.e. Dana 70 vs 80. The 80 has a longer pinion, and needs a shorter driveshaft.... or a lift to eat up the excess.

All times are GMT -5. The time now is 09:38 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page