12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

truck will not stay running after big line kit

Thread Tools
 
Search this Thread
 
  #51  
Old 04-18-2014, 12:41 PM
Join Date: Apr 2014
Posts: 5
Received 0 Likes on 0 Posts
Default

Have you tried putting clear hose on the return side to see if there is air in the fuel system?
 
  #52  
Old 04-20-2014, 06:01 PM
ebarresi5894's Avatar
Diesel Wrench
Thread Starter
Join Date: May 2011
Location: Rehoboth, MA
Posts: 525
Received 12 Likes on 12 Posts
Default

not yet. it runs perfectly fine it only does it on startup its hard starting.

I have good fuel pressure tight connections no leaks.

I noticed its harder to start the lower the fuel level is. starting to think fuel is draining back into tank. don't believe its the pick up tube because its brand new. OFV is new. all fuel lines are new.

losing my mind. going to try a new filter tomorrow.
 
  #53  
Old 04-21-2014, 05:32 AM
turbo2332's Avatar
Diesel Bomber
Join Date: Jun 2011
Location: Indiana
Posts: 2,171
Received 104 Likes on 101 Posts
Default

what does it idle at?
 
  #54  
Old 04-21-2014, 07:00 PM
ebarresi5894's Avatar
Diesel Wrench
Thread Starter
Join Date: May 2011
Location: Rehoboth, MA
Posts: 525
Received 12 Likes on 12 Posts
Default

800, but it always did

---AutoMerged DoublePost---

I put my foot on it and it starts right up let it idle and almost every time I let me foot off after 10 secs of idling it sputtered for a second and idles fine and doesnt do it again until I shut it off
 

Last edited by ebarresi5894; 04-21-2014 at 07:00 PM. Reason: Automerged Doublepost
  #55  
Old 04-22-2014, 10:54 AM
12vcummins96's Avatar
Administrator

Join Date: Aug 2009
Location: Pearland Tx
Posts: 5,765
Received 340 Likes on 273 Posts
Default

it sounds like air is getting introduced from somewhere
 
  #56  
Old 04-22-2014, 11:53 PM
Join Date: Apr 2014
Posts: 5
Received 0 Likes on 0 Posts
Default

That is why I suggested to hook up a clear hose on the return line and verify for sure there is no air in the fuel system
 
  #57  
Old 04-23-2014, 04:52 AM
ebarresi5894's Avatar
Diesel Wrench
Thread Starter
Join Date: May 2011
Location: Rehoboth, MA
Posts: 525
Received 12 Likes on 12 Posts
Default

now let me ask you guys a question. If I set up a fuel pressure gauge and I am getting 25 psi and it's solely drops after I shut the truck off is this a normal thing or should it stay pressurized
 
  #58  
Old 04-23-2014, 05:30 AM
mysterync's Avatar
Diesel Bombers Sponsor
Join Date: Mar 2007
Location: Blowing Rock,NC
Posts: 3,791
Received 367 Likes on 251 Posts
Default

It may not bleed back off but the pressure will drop.

Sent from my SCH-I605 using Tapatalk 2
 
  #59  
Old 04-23-2014, 07:28 AM
ebarresi5894's Avatar
Diesel Wrench
Thread Starter
Join Date: May 2011
Location: Rehoboth, MA
Posts: 525
Received 12 Likes on 12 Posts
Default

Im leaning towards the check valve being bad in the lift pump
 
  #60  
Old 04-23-2014, 07:42 AM
mysterync's Avatar
Diesel Bombers Sponsor
Join Date: Mar 2007
Location: Blowing Rock,NC
Posts: 3,791
Received 367 Likes on 251 Posts
Default

This thread has gone round and round when all that changed was a big line kit. Wouldn't that mean that the cause most likely be in the big line kit? If I was having this much trouble I'd find someone who knew what they were doing and let them fix the truck!

Sent from my SCH-I605 using Tapatalk 2
 


Quick Reply: truck will not stay running after big line kit



All times are GMT -5. The time now is 02:52 AM.