Hw manny miles since the build ? usually they will have some blow bye till they seal up ... can take 1K to 5K to really work the rings in ... I know our detroits (S60) usually consumes oil for around 3500 miles then just stops using iol and lives happily for quite a while ..

 

between 2k and 5k

 

Aww heck .... She's still a virgin .... Gonna need at least 10k .... Do some good long hill pulls with a decent amount of weight on a trailer .... Helps get things seated ...

 

thats what i mean and there is a small amount of blow by

 

Its to be expected since the engine isn't totally sealed up just yet .... Should and most likely is using a tad bt more than normal oil also .... Common on a new built engine ...

some blow bye and oil consumption is to be expected .....

like I said ... Go borrow or rent a trailer and load it up and go tow up some good sized hills and it should help a bit .... Racin around town or back roads ain't gonna do it .... They need to be worked in .... Or it will take quite a while .... 10/15K if your just cruzin around ... Wouldn't surprise me a bit

 

What do you mean by "warped 9000s block"

 

i block was warped "shape" to were it couldnt hold a head gasket due to major over heating

 

 

dont believe me

 

Don't believe you? Dude, I couldn't even understand you.