Delivery Valve Install
#1
#2
torque the holder to 85 ft-lbs and make sure you don't cut the o rings. When your removing the holders be mindfull of the spring, shims, and poppet don't drop them or lose any. Re install just as you took them out its a pretty straight forward install just take your time and don't rush it.
Depending on the pump you may need a pick to remove the copper seal rings if there there.
Depending on the pump you may need a pick to remove the copper seal rings if there there.
Thread
Thread Starter
Forum
Replies
Last Post
Bill in Ballard
Ford 83-94 6.9 and 7.3L General
3
03-13-2016 07:42 PM
bonestock
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
02-01-2015 08:41 PM