need pcm help on a conversion project!
#1
need pcm help on a conversion project!
I'm helping a local guy with his latest project. He bought a rusted out 97 12v with good frame and he put a 69 gmc 1 ton cab on it. I need to apply power to the pcm so the transmission and charging system work properly. I was hoping someone could tell me which pin is power and which is ground! Thanks in advance
---AutoMerged DoublePost---
bump- got the pcm all hooked back up and ready to run, but now I need to know what I will need from the wiring harness connected to the power distribution box if anything. never worked on a conversion like this before
---AutoMerged DoublePost---
bump- got the pcm all hooked back up and ready to run, but now I need to know what I will need from the wiring harness connected to the power distribution box if anything. never worked on a conversion like this before
Last edited by olsmokey; 12-17-2013 at 09:26 AM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
Jet A Fuel
6.7 Liter Dodge Cummins 07.5-12
3
08-03-2015 10:45 AM
Dan S
24 Valve 2nd Gen Dodge Cummins 98.5-02
4
06-09-2015 06:55 PM
Diesel Bombers
General Diesel Related
0
03-04-2015 08:20 AM
Diesel Bombers
Latest Automotive Industry News
0
11-11-2014 04:10 PM