few ?s
#1
few ?s
ok i bought a new to me truck. 1994 2wd reg long bed cummins auto thats about trashed ok so today i was looking for a fuel leak. Wile looking i found that my truck has no AFC houseing at all just a riged up cover plate thing. when i go to install one what should i look for/do to insure every thing is right ?
#3
#5
#6
I would get a ETG gauge and see what your exhaust temperatures are with out a plate first. If you can control your ETGs and smoke levels without a plate, then no need to put a plate in.
I hear a #10 plate is a safe plate to start out with if you want one. From there you can modify.
FYI, the plate only controls fueling after the spring in your AFC moves over enough to have your AFC foot touch the pate, which will manly be in WOT runs or getting into the throttle.
I hear a #10 plate is a safe plate to start out with if you want one. From there you can modify.
FYI, the plate only controls fueling after the spring in your AFC moves over enough to have your AFC foot touch the pate, which will manly be in WOT runs or getting into the throttle.