12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

door loose

Thread Tools
 
Search this Thread
 
Old Nov 20, 2012 | 07:45 AM
  #1  
yfzrunner's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jul 2012
Posts: 132
Likes: 2
From: dfw tx
Default door loose

Any one have a problem with there door rubbing the bottom of the cab. I just dont wanna rub a hole in the cab are something as of now i just have to pick up on it and shut it at the same time. And when driving down the highway it shakes pretty bad. If i pick up on it i moves just cant see where
 
Reply
Old Nov 20, 2012 | 07:47 AM
  #2  
96blackcloud's Avatar
Diesel Enthusiast
Joined: Apr 2009
Posts: 396
Likes: 10
From: ohio
Default

make sure your bottom door pin is all the way seated, my worked loose just a bit and my door sagged.

-chris
 
Reply
Old Nov 20, 2012 | 08:08 AM
  #3  
yfzrunner's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jul 2012
Posts: 132
Likes: 2
From: dfw tx
Default

ya thats how mine is just tap them back in with a hammer. And could those pins eventually wear down and have to get new ones.
 
Reply
Old Nov 23, 2012 | 05:28 PM
  #4  
olsmokey's Avatar
Diesel Enthusiast
Joined: Nov 2012
Posts: 169
Likes: 9
From: maine
Default

door pins have always been an issue on dodges. ive had to replace doorpins on every dodge ive owned except the 04'. they definatly wear down eventually and must be replaced.
 
Reply




All times are GMT -5. The time now is 05:46 AM.