DURAMAX EGR BLOCKER PLATE
#1
DURAMAX EGR BLOCKER PLATE
HAVE A 06 DURAMAX WAS LOOKING INTO THE EGR BLOCKER PLATE AND FINGER STICK KIT,
WAS WONDERING IF ANYONE HAS INSTALLED ONE AND IF IT IS WORTH IT? I OWN A SMALL TREE SERVICE AND DO ALOT OF HEAVY TOWING AND LOOKING TO ADD SOME MORE TOWING POWER. IM ALSO LOOKING FOR A PROGRAMMER AND WANTED TO KNOW THE BEST ONE OUT THERE?? ANYONE WITH ANY SUGGESTIONS FOR CHEAP POWER GAINS?? THANKS
WAS WONDERING IF ANYONE HAS INSTALLED ONE AND IF IT IS WORTH IT? I OWN A SMALL TREE SERVICE AND DO ALOT OF HEAVY TOWING AND LOOKING TO ADD SOME MORE TOWING POWER. IM ALSO LOOKING FOR A PROGRAMMER AND WANTED TO KNOW THE BEST ONE OUT THERE?? ANYONE WITH ANY SUGGESTIONS FOR CHEAP POWER GAINS?? THANKS
#2
welcome to db. the blocker plate is worth doing to keep the sooty exhaust gases from being recirculated back into your truck's intake, the plate will cost about $12. don't even worry with the finger stick especially if you are considering a tuner. now you asked for the best tuner and the best tuner known for your duramax is called efilive, but ppe and quadzilla are pretty good canned tuners.
#3
WILL THE PLATE SET OFF ANY CODES IF I DO IT WITHOUT A PROGRAMMER FOR NOW? IM LOOKING FOR WAYS TO GET BETTER PERFORMANCE FOR TOWING, MPG, AND RUN COOLER ENGINE AND TRANS TEMPS. I HAVENT DONE ANY MODS TO MY TRUCK YET. I PLAN ON KEEPING THIS TRUCK FOR AS LONG AS POSSIBLE AND WANT TO START DOING ANYTHING THAT WILL HELP PROLONG MY ENGINE AND TRANS. I WORK AROUND LOTS OF DIESEL ENGINES MOSTLY HEAVY EQUIPMENT, HEAVY TRUCKS AND TRACTORS. ALL MECHANICAL ENGINES, I AM JUST NOW GETTING INTO THE ELECTRONC DIESELS SO ITS A WHOLE NEW BALL GAME. GET NERVOUS MAKING MODS BECAUSE ITS MY WORK AND DAILY DRIVER. THANKS FOR YOUR HELP AND ANY FURTHER SUGGESTIONS.
#4
efilive! the only way to go on a dmax! they do have some tuners that are good but with efilive you will never "outgrow" it. you can always change the tunes as needed
---AutoMerged DoublePost---
oh and you will need the programmer that will allow you to delete the egr or your truck will not be happy
---AutoMerged DoublePost---
oh and you will need the programmer that will allow you to delete the egr or your truck will not be happy
Last edited by turbostang7; 06-12-2011 at 10:23 PM. Reason: Automerged Doublepost
#6
i put in the blocker plate w/ a finger stick.works great as long as you can solder and tee into wires no problem.i have edge juice so i had to use a finger stick.i want to do the intake grid heater delete(major power gains as long as you dont live in snow/supercold), but there is no finger stick for that so i have to get efilive first.
#7
#9
#10