Getting My Straight Piped LB7 louder?
#1
#2
#3
A megaphone tip oughta make it louder, not sure where you'd get one. Probably have to be custom. Personally I think it'd be cool to make it look like an upsized version of the stock tip, just my $.02
---AutoMerged DoublePost---
Y'know, the late model megaphone tip that's supposed to cool off the exhaust gasses. I'm not sure if they were on the LLYs or not.
---AutoMerged DoublePost---
Y'know, the late model megaphone tip that's supposed to cool off the exhaust gasses. I'm not sure if they were on the LLYs or not.
Last edited by Eddiebuntain; 05-16-2012 at 01:42 PM. Reason: Automerged Doublepost
#4
#5
A megaphone tip is shaped like a cheerleader's megaphone or cop's bullhorn on the end of the exhaust pipe. Used to be on hot rods and duece coupes, might check out MoonEyes, SoCal Speed Shop, Speedway motors,etc. For larger pipe, it may have to be custom made, look for some kinda large metal cone that you can cut the tip off of to fit your exhaust pipe.
Probably be better to start with a downpipe back exhaust kit in a larger diameter, preferably the largest you can get in 309 stainless steel. Stacks about level with your roofline ought to crank up the volume a bit.
Again, just my $.02, food for thought.
Probably be better to start with a downpipe back exhaust kit in a larger diameter, preferably the largest you can get in 309 stainless steel. Stacks about level with your roofline ought to crank up the volume a bit.
Again, just my $.02, food for thought.
#6
#7
If you want a pile of noise (drone) I still got my old 12v Cummins for sale I had the top of the stack about 5 inches below roof line (ran outta pipe). It sounded awesome and I don't regret a minute of driving it but the fact that I had noticeable hearing loss after a few weeks driving it kinda sucked.
Thread
Thread Starter
Forum
Replies
Last Post
RAtwood
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
04-12-2015 08:56 PM