3rd Gen Tech: Big Line kit
#14
Yeah, for this mod, $65.00
I did this mod back in March of 2008.
It can be had cheaper, if you shop around for the fittings. I bought everything from Summit, except for the Banjo bolt. I got that from Diesel Manor.
---AutoMerged DoublePost---
I don't see why not, especially at the Filter housing.
Probably could use it at the CP3 if you wanted...
I probably wouldn't be able to because of the lower bracket for my compressor mount.
I did this mod back in March of 2008.
It can be had cheaper, if you shop around for the fittings. I bought everything from Summit, except for the Banjo bolt. I got that from Diesel Manor.
---AutoMerged DoublePost---
Probably could use it at the CP3 if you wanted...
I probably wouldn't be able to because of the lower bracket for my compressor mount.
Last edited by wildcat; 01-07-2009 at 11:58 PM. Reason: Automerged Doublepost
#15
nice job! i may look into doing this on my truck...much like you in preparation for future mods.
---AutoMerged DoublePost---
do you have a part number for that banjo bolt? the fuel pressure that you are monitoring w/ that, its the LP fuel pressure correct?
---AutoMerged DoublePost---
do you have a part number for that banjo bolt? the fuel pressure that you are monitoring w/ that, its the LP fuel pressure correct?
Last edited by nwflyoda; 01-08-2009 at 08:10 AM. Reason: Automerged Doublepost
#16
That is the BEST reason to do all the things you want to do! In preparation for bigger and better things!
Ohh, thanks for the compliment!
EDIT: Yes, monitoring Lift Pump Pressure with it.
I can do you better than a P/N... try here:
http://www.dieselmanor.com/dm_products/DM-DBBLT.asp
The Blue one in the Tech article pic comes with the Banjo AN fitting you need to order....
Last edited by wildcat; 01-08-2009 at 08:32 AM. Reason: info for member