94 PowerStroke wont start
#14
#15
#16
#18
yes, i have taken the fuel filter cap off a couple of times just to check the fuel level and its good and full, even went so far as to turn truck over and verify that fuel is coming in to the bowl.
---AutoMerged DoublePost---
I need to know if there is a way to check if oil is getting to the injector, like can i pull the injector and turn the engine over and look to see oil in the opening or something.
---AutoMerged DoublePost---
I need to know if there is a way to check if oil is getting to the injector, like can i pull the injector and turn the engine over and look to see oil in the opening or something.
Last edited by cableneff; 03-05-2011 at 01:03 PM. Reason: Automerged Doublepost
#19
#20
yes the oil in the truck is at the correct level, hpop is full, i just put a new icp sensor on the truck and i've just tried to start it unpluged and nothing.. Note..i can hear the injectors opening after a few seconds which i feel is a good sign because that means the hpop is building pressure, checked for smoke at the stack while turning engine over, no smoke... just loosened fuel line going to pass side head and got fuel, is there some way the injectors are not getting the fuel to them? could an o-ring fail and cause this problem...i havent noticed any change in the oil level since ive changed it..
---AutoMerged DoublePost---
as far as the IDM goes i dont really think i can get one short of buying one off the web. If it has failed would the injectors still open..
---AutoMerged DoublePost---
as far as the IDM goes i dont really think i can get one short of buying one off the web. If it has failed would the injectors still open..
Last edited by cableneff; 03-05-2011 at 06:16 PM. Reason: Automerged Doublepost