Ok,

I am updating my head lights on my 99 sport since the housings are so scratched and blurry you cant see the bulbs. My question is I see my headlights have 2 bulbs a 9007 low and a 9005 high. My plan is to update both to HID but need to know if I need to by a bi-xenon kit for both bulbs or a single xenon kit for both? I cant tell when the high beams are activated if all 4 bulbs stay on. thanks in advance for the info.

---AutoMerged DoublePost---

a little help please!!!!

asabadin's Sig:

1999 dodge ram sport quad cab 4x4. ATS stage 3 Trans with ATS 5 star torque converter, co-pilot lock up control, ATS air intake arch, Bosch injectors, ATS 3 piece exhaust manifold, banks exhaust from turbo back. Superchips D-Box and boost elbow. AFE stage 2 with Pro Gard7 filter.

I'd be interested in what you find out.

USAFGopherMike's Sig:

99 3500 5spd / Alcoa's / K&N Airbox / lots of upgrades to come
"I feel sorry for people who don't drink. When they wake up in the morning, that's as good as they're going to feel all day." -Dean Martin

look around on ebay and see what others have there is a cummins site Pure Cummins Diesel Performance - FLASHTECH HID Lighting System #flashtechhid
I have been looking around, but i went with the black smoke look head lights there nice but need higher power bulbs hope this helps

coyropin's Sig:

01 3500 dodge 24 v cummins, GD Stage 5 150 hp injectors, GD turbo stage 3, 16cfm exhaust 14cfm intake, AFE intake, Edge 5 stage chip, DD 12 button south bend clutch,#2 vp44 pump fass fuel ddp, dual 5 in exhaust stacks flat bed

no help yet let's hope we can find some good info on this subject

Ok got the parts, and will be doing the install this weekend. Bulbs are 9004=high beam and 9007 low beam, which are essentially the same bulb, just the neg and pos. are flip flopped. Will be installing 55w digital kit on both high and low beam. Hopefully I don't need relays, but I have them handy just in case. I'll post before and after photos and some pics of the install.