pre bost smoke new fuel pin?
#1
pre bost smoke new fuel pin?
Ok so check this out guys before with stock fuel pin I turned it 90 of stock and I had the smoke screw turned all the way down to flush with the nut ya I had smoke of course so now I put a denny t stage 1 and and backed out the smoke screw all the way till it just wasn't touching then turned it back down 1/4 turn till it was touching the pin (btw I have my stock injectors in the truck still) back to the smoke I thought I would have less pre boost smoke and I have more am I missing something here cause when I put them side by side I should of been lower on the pin and had less smoke p.s. the power increase is awesome once in the boost lovin it im planning on doing more star wheel adjustments as soon as I put my injectors in my goal is tune for power not smoke please by all means put in your thoughts
#2
#3
#4
not sure.. with my smoke screw out it would smoke on very light acc and lag until the afc pin would move down to give it more fuel then the turbo would come in and take off like a bat out of hell! that went away with fuel coming in sooner. the turbo would build boost sooner and clear up the smoke sooner.. not sure if I am explaining it correct.
#5
Thread
Thread Starter
Forum
Replies
Last Post
Jet A Fuel
Tech Article Submission
0
06-05-2015 03:28 PM
RatsMC
Chevy/GMC 6.2L and 6.5L
19
05-04-2015 05:25 PM